Évaluations - 3, GPA: 5
(
)
)
|
Facilité d'utilisation
. The Document Centre emits unusual odors, or makes unusual noises. . The power cable is damaged or frayed. . A wall panel circuit breaker, fuse, or other safety device has been tripped. . Liquid is spilled into the Document Centre. . The Document Centre is exposed to water. . Any part of the Document Centre is damaged. NOTE The only method to remove all power from the Document Centre is to disconnect the power cable from the electrical outlet. Safety Notes Xerox Document Centre User Guide Page 3 Ozone Information This product produces ozone during normal operation. The ozone produced is dependent on copy volume and is heavier than air. Install the system in a well ventilated room with the minimum cubic requirements size listed below. Providing the correct environmental parameter will ensure the concentration levels meet safe limits. The minimum cubic requirements are listed below: Table 1: Ozone requirements Document Centre Product Ozone Cubic requirement 470/460/265/255 DC or ST 1,060 ft3 240 DC 710 ft3 240 ST 1,060 ft3 To determine if the room has the required volume to meet the ozone requirement, the length of the room multiplied by its width and height should be equal to or greater than the cubic volume listed above. If you need additional information about ozone, please request the Xerox publication Ozone (part number 600E74140) by calling 1-800-828-6571 in the United States and Canada. Page 4 Xerox Document Centre User Guide Laser Safety CAUTION Use of controls, adjustments or procedures other than those specified in this guide may result in hazardous light exposure. The Document Centre complies with international safety standards and is certified as a Class 1 Laser Product. With specific regard to lasers, the equipment complies with laser product performance standards set by governmental, national, and international agencies as a Class 1 Laser Product. It does not emit hazardous light, as the beam is totally enclosed during all phases of customer operation and maintenance. Safety Notes Xerox Document Centre User Guide Page 5 Operational Safety Xerox equipment and supplies have been designed and tested to meet strict safety requirements. These include safety agency examination, approval and compliance with established environmental standards. Follow these safety guidelines at all times: Always Do These . Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a qualified electrician. . Always follow all warnings and instructions that are marked on or are supplied with the equipment. . Always exercise care when moving or relocating the equipment. Please contact your local Xerox Service Department to arrange relocation of the machine to a location outside of your building. . Always locate the machine on a solid support surface (not on plush carpet) that has adequate strength to support the weight of the machine. . Always locate the machine in an area that has adequate ventilation and room for servicing. . Always use materials and supplies that are specifically designed for your Xerox equipment. Use of unsuitable materials may result in poor performance and possibly a hazardous situation. NOTE Your Document Centre is equipped with an energy saving device to conserve power when the machine is not in use. The machine may be left on continuously. Page 6 Xerox Document Centre User Guide Never Do These . Never use an adapter plug to connect equipment to a power source that lacks a ground connection terminal. . Never obstruct ventilation openings. They are provided to prevent overheating. . Never push objects of any kind into the ventilation openings. . Never attempt any maintenance function that is not specifically described in the documentation. . Never remove any covers or guards that are fastened with screws. There are no operator serviceable areas within these covers. . Never position the machine near a radiator or any other heat source. . Never override or “cheat” any of the electrical or mechanical interlock devices. . Never operate the equipment if you notice unusual noises or odors. Disconnect the power cord from the power outlet and contact Xerox. Safety Notes Xerox Document Centre User Guide Page 7 Safety Extra Low Voltage Approval These Xerox Digital Copiers/Printers are in compliance with various governmental agencies and national safety regulations. All system ports meet the requirements for Safety Extra Low Voltage (SELV) circuits for connection to customer-owned devices and networks. Additions of customer-owned or third-party accessories that are attached to these printers/copiers must meet or exceed the requirements previously listed. All modules that require external connection must be installed per Xerox installation procedures. Page 8 Xerox Document Centre User Guide Welcome This User Guide supports the Document Centre 470/460/265/255/240 DC and ST models. ST models can print, scan, fax and copy. DC models produce copies at the machine. Scan a...
Ce manuel est également adapté pour les modèles :Imprimantes - 240 DC (1.2 mb)
Imprimantes - 255 DC (1.2 mb)
Imprimantes - 460 DC (1.2 mb)
Imprimantes - 460 ST (1.2 mb)