• If you selected in step 14: 15 Press [Set]. Ex: BORDERLESS PRINT OFF 16 Use [2] or [3] to select borderless printing. •Select: – to print the photograph with a border. – to print the photograph without a border. 17 Press [Set]. •Use [2] or [3] to view your settings in the LCD. Ex: SINGLE FRAME SINGLE FRAME or PLAIN LTR st NO.0002 01 18 Press [Start]. NOTE •Printing is enlarged or reduced automatically according the paper size. Depending on the paper type and whether borderless printing is selected, the photograph may be cropped. •A margin may still appear even if you select borderless printing on letter-size paper. • More information For detailed information on all photo printing features, refer to the Comprehensive Guide. 5-8 Photo printing from a memory card—Basic operation Chapter 5 Chapter 6 Copying Basic operation • Before copying Before copying, check the following: • Does the document you want to copy meet the requirements for loading on the platen glass or ADF? For details, see p. 2-1. • Is the correct print media loaded in the multi-purpose tray? For details, see p. 2-2. • Making copies Follow this procedure to make color or black & white copies. 1 Press [Copy]. 2 Load the document on the platen glass or Fax Model ADF. • For details on how to load documents, see p. 2-2. 3 Use the numeric keys to enter the number of copies. 4 Adjust any necessary settings for your document. •Press [Color] for color copying, or [B&W] for black & white copying (• below). •Press [Paper Select] to select the print media size and type (• p. 2-7). •Press [Image Quality] to select the scanning resolution (• p. 6-2). •Press [Exposure] to select the scanning exposure (• p. 6-2). •Press [Enlarge/Reduce] to select the copy ratio (• Comprehensive Guide). 5 Press [Start]. •To cancel copying, press [Stop/Reset]. • Improving copied images Setting color or black & white copying Refer to Making copies above, and in step 4, set color or black & white copying as follows: For color copying: Press [Color] to turn on its light. For black & white copying: Press [B&W] to turn on its light. Fax Model 6 Copying— Chapter 6 Copying—Basic operation 6-1 Adjusting the image quality (resolution) Refer to Making copies on p. 6-1, and in step 4, adjust the image quality as follows: 1 Press [Image Quality]. 2 Use [2] or [3] to select the image quality. • In black & white mode, select: – for text-only documents. – for photographs. – for high-speed copying at a lower resolution.* In color mode select: – for color text-only documents. – for color photographs. – for high-speed color copying at a lower resolution.* 3 Press [Set]. NOTE •When using , if the color output is different from that expected, select or and try copying again. Adjusting the exposure (density) Exposure (density) is the degree of difference between light and dark. A high contrast setting will make blacks darker and whites brighter, whereas a low contrast setting will make the differences between black and white less marked. Refer to Making copies on p. 6-1, and in step 4, adjust the exposure as follows: 1 Press [Exposure]. 2 Use [2] or [3] to select the exposure. 3 Press [Set]. • More information For detailed information on all copying features, refer to the Comprehensive Guide. *This setting is only available when is selected as the print media type (• p. 2-7). 6-2 Copying—Basic operation Chapter 6 Chapter 7 Chapter 7 Fax Model Faxing from your computer Basic operation • Sending faxes from your computer Before sending faxes from your computer Before sending faxes from your computer, check the following: • Have you installed the MultiPASS Suite software? If not, see the Setup Sheet or the Software Guide. • Have you entered the sender information? Before sending faxes, you must register your name and fax/telephone number so that they are printed at the top of faxes you send. For more details on what sender information is, see the Comprehensive Guide. You can register this information directly from the operation panel (• p. 8-1), or from the MultiPASS Suite software. Follow this procedure to set it from the software: 1 Open My MultiPASS (• p. 3-3). 2 On the MultiPASS menu, point to [Device Setup/Speed Dial], then click [MultiPASS F80]. 3 On the Send Fax tab, enter your name and fax/telephone number in Fax Information. •You do not need to enter the date and time. Faxes sent from your computer will include your computer system’s date and time. 4 Click [OK]. • Have you set the correct telephone line type? Before sending faxes from your computer, make sure you have set the correct telephone line type for your telephone line. You can set the telephone line type directly from the operation panel, or from the MultiPASS Suite software. Follow this procedure to set it from the software: 1 Open My MultiPASS (• p. 3-3). 2 On the MultiPASS menu, poi...
)
Log: