Évaluations - 2, GPA: 4.5 ( )

Fabricant : Samsung Taille : 5.92 mb Nom Fichier : Langue d'enseignement:

Disconnect the USB cable if you want to set up the wireless network using the WPS button. • If you want to set up the wireless network using the USB cable, refer to "Access point via USB cable" on page 120. The next window asks you to check if your access point (or wireless 11 router) supports WPS or not. If the access point (or wireless router) has a WPS button, select Yes and click Next. Follow the instructions in the window to set up the wireless network. 12 •For models with a display screen, follow the steps below: aPress and hold the (WPS) button on the control panel for about 2-4 seconds. The machine waits up to 2 minutes for the WPS button on the access point (or a router) to be pressed. bPress the WPS (PBC) button on the access point (or wireless router). The messages are displayed on the display screen in the order below: -Connecting: The machine is connecting to the access point (or wireless router). -Connected: When the machine is successfully connected to the wireless network, the WPS LED light stays on. 2. Using a network-connected machine 125 Wireless network setup -SSID Type: After completing the wireless network connection process, the AP’s SSID information appears on the display. •For models without a display screen, follow the steps below: aPress and hold the (WPS) button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on the access point (or wireless router). bPress the WPS (PBC) button on the access point (or wireless router). -The light blinks fast on the WPS LED. The machine is connecting to the access point (or wireless router). -When the machine is successfully connected to the wireless network, the WPS LED light stays on. Wireless network set up is completed. After installation is finished, click 13 Quit. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Setup using Macintosh" on page 120). Ad hoc via USB cable If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad hoc wireless network by following these simple directions. Items to prepare • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • USB cable Creating the ad hoc network in Macintosh Check whether the USB cable is connected to the machine. 1 Turn on your computer and the wireless network machine. 2 Insert the supplied software CD into your CD-ROM drive. 3 Double-click the CD-ROM icon that appears on your Macintosh desktop. 4 Double-click the MAC_Installer folder > Installer OS X icon. 5 Click Continue. 6 Read the license agreement and click Continue. 7 2. Using a network-connected machine 126 Wireless network setup Click Agree to agree to the license agreement. 8...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :