Évaluations - 0, GPA: 0 ( )

Fabricant : Brother Taille : 7.17 mb Nom Fichier : Langue d'enseignement:

• Columns - The right margin equals the number of columns (specified here) multiplied by the width of the number of columns specified. The width of each column is determined by the [Default Pitch] setting. For example, if [Right Margin] is set to 12, and [Default Pitch] is set to [12 characters/inch], the actual width of the left margin is 1 inch (25.4 mm). Note that if [Default Pitch] is set to [Proportional], 10 characters/inch is used for this calculation. The maximum width of the right margin is a setting that results in 0.2 inches (5.08 mm) of printable page width (the space between the left and right margins). 7 Default Pitch Available settings: [10 characters/inch], [12 characters/inch], [15 characters/inch], [Proportional] Default setting: [12 characters/inch] This parameter determines character width. When 10, 12, or 15 characters/inch is selected, each character is the same width. For example, the letters “w” and “i” will be the same width. When [Proportional] is selected, character width varies by character. For example, the letter “w” will be wider than the letter “i”. Note that the setting selected here affects the width of the left and right margins. 3 31 Chapter 3 Defining Power and Roll Paper Options 123456 1 Auto Power On Available settings: [Disable], [Enable], [Enable (No Main Button)] Default setting: [Disable] This parameter determines how the printer responds when it is connected to an AC or DC power outlet. • Disable - The printer enters sleep mode, using minimal power. To turn on the printer, press the (Power) button. • Enable -The printer turns on automatically. This is useful in situations where the (Power) button is difficult to access. • Enable (No Main Button) - The printer turns on automatically. The (Power) button cannot be used to turn off the printer. This is useful in situations where the button could be accidentally pressed. To turn off the printer, disconnect the printer from the AC or DC power outlet. 2 Auto Power Off(AC/DC/Li-ion) Available settings: [None], [10 Minutes], [20 Minutes], [30 Minutes], [40 Minutes], [50 Minutes], [60 Minutes] Default setting: [None] This parameter determines how much time passes before the printer turns off automatically to conserve power when it is being powered by AC power, DC power, or a rechargeable Li-ion battery. If no data is received for the specified amount of time, the printer turns off. 3 Auto Power Off(Ni-MH) Available settings: [None], [10 Minutes], [20 Minutes], [30 Minutes], [40 Minutes], [50 Minutes], [60 Minutes] Default setting: [10 Minutes] This parameter determines how much time passes before the printer turns off automatically to conserve power when it is being powered by the rechargeable Ni-MH battery. If no data is received for the specified amount of time, the printer turns off. If the printer is connected to an AC or DC power outlet while a rechargeable Ni-MH battery is installed, the setting selected for [Auto Power Off(AC/DC/Li-ion)] has priority over this parameter. 4 Refresh Ni-MH Battery Available settings: [Do Not Refresh], [Each Time], [Every 5 Times], [Every 10 Times] Default setting: [Do Not Refresh] This parameter determines how frequently the Ni-MH battery is refreshed. For example, if [Every 5 Times] is selected, the rechargeable Ni-MH battery is refreshed one time for every five times the battery is charged. For details on the refresh and charge operations for the rechargeable Ni-MH battery, see Charging the Rechargeable Ni-MH Battery on page 3. 5Skip Perforation Available settings: [Disable], [Enable] Default setting: [Disable] This parameter is used to leave a one-inch (25.4 mm) margin at the top and bottom of the paper. This is useful when printing on perforated roll paper so that the printer does not print on the perforation. 6 Dash Line Print Available settings: [Disable], [Enable] Default setting: [Disable] 32 PJ-600 Series Utility This parameter is used to print dash lines between pages, useful when printing on roll paper. When [Enable] is selected, set [Form Feed Mode] to [Fixed Page]. Note that dash lines are printed on the paper; they are not punched in the paper. Note If this parameter is changed in the printer driver’s dialog box, that setting has priority. 3 33 Chapter 3 Defining Print Density and Other Options 1234567 1 Print Density Available settings: [0]-[10] Default setting: [6] (PJ-623/663), [4] (PJ 622/662) This parameter determines print density, which affects the darkness of the printed document. A lower value produces lighter print; a higher value produces darker print. Darker print uses more battery power, but may be easier to read if the font or other document content is made up of narrow lines. If battery conservation is important, select a lower value. Note If this parameter is changed in the printer driver’s dialog box, that setting has priority. 2 Form Feed Mode Available settings: [No Feed], [Fixed Page], [End of Page], [End of Page Retract] Default setting: [Fixed Page] T...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :