Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
Please keep this manual in a handy place near the machine. Please read the Safety Information in the Copy Reference before using this machine. It contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. In accordance with IEC 60417, this machine uses the following symbols for the main power switch: a aaaa means POWER ON. c cccc means STAND BY. Notes Some illustrations may be slightly different from your machine. Certain options may not be available in some countries. For details, please contact your local dealer. Operator Safety This machine is considered a CDRH class I laser device, safe for office/EDP use. The machine contains a 5- milliwatt, 760- 800 nanometer wavelength, GaAIAs laser diode. Direct ( or indirect reflected ) eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock mechanisms have been designed to prevent any possible laser beam exposure to the operator. Laser Safety: The Center for Devices and Radiological Health ( CDRH) prohibits the repair of laser- based optical unit in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and laser subsystems to the factory or service depot when replacement or the optical subsystem is required. Warning: Use of controls or adjustment or performance of procedures other than those specified in this manual might result in hazardous radiation exposure. Notes: The model names of the machines do not appear in the following pages. Check the type of your machine before reading this manual. ( For details, see P. v “ Machine Types” .) • Type 1: No fax function installed • Type 2: Fax function installed Certain types might not be available in some countries. For details, please contact your local dealer. Two kinds of size notation are employed in this manual. With this machine refer to the inch version. For good copy quality, the supplier recommends that you use genuine toner from the supplier. The supplier shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the supplier with your office products. Power Source 120V, 60Hz, 7A or more Please be sure to connect the power cord to a power source as above. For details about power source, see P. 61 “Power Connection” . Safety Information When using your equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: R WARNING: Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. R CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. R WARNING: • Connect the power cord directly into a wall outlet and never use an extension cord. • Disconnect the power plug (by pulling the plug, not the cable) if the power cable or plug becomes frayed or otherwise damaged. • To avoid hazardous electric shock or laser radiation exposure, do not remove any covers or screws other than those specified in this manual. • Turn off the power and disconnect the power plug (by pulling the plug, not the cable) if any of the following conditions exists: • You spill something into the equipment. • You suspect that your equipment needs service or repair. • Your equipment's cover has been damaged. • Do not incinerate spilled toner or used toner. Toner dust might ignite when exposed to an open flame. • Disposal can take place at our authorized dealer or at appropriate collection sites. • Dispose of the used toner cartridge in accordance with the local regulation. R CAUTION: • Protect the equipment from dampness or wet weather, such as rain, snow, and so on. • Unplug the power cord from the wall outlet before you move the equipment. While moving the equipment, you should take care that the power cord will not be damaged under the equipment. • When you disconnect the power plug from the wall outlet, always pull the plug (not the cable). • Do not allow paper clips, staples, or other small metallic objects to fall inside the equipment. • Keep toner (used or unused) and toner cartridge out of the reach of children. • For environmental reasons, do not dispose of the equipment or expended supply waste at household waste collection points. Disposal can take place at an authorized dealer or at appropriate collection sites. • The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise it could cause a personal burn. • Our products are engineered to meet high standards of quality and functionality, and we recommend that you only use the expendable suppl...