Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
3. Select the tray in Paper Supply. 4. Press the Advanced tab > ID Copy. 5. Press Start on the control panel. Then the machine starts scanning the front side. 6. Turn the original over and place it on the scanner glass, where arrows indicate as shown. Then, close the scanner lid. 7. Press Start on the control panel to begin copying. • If the original is larger than the printable area, some portions may not be printed. • If this option is grayed out, select the Duplex option to 1 -> 1 Sided, the Output option to Collated. Copying ID with the manual ID copy option If you want to copy several ID cards on a paper, or adjust the copying position of the page, follow the next steps. Next steps are the procedure when you copy two people's driver's license cards (100mm X 80mm) in one page. 1 Press Machine Setup on the control panel. 2 Select Admin Setting. When the login message pops up, then enter password and press OK. 3 Press the Setup tab > Copy Setup > Manual ID Copy Setup. 4 Press the number from the template list table. 5 Press Edit Template. 6 Selec the appropriate option values and press OK. • Template Name: Enter the template name. • Scan Position: Select the position for scanning. You should select the largest scanning position out of the originals. LEFT, TOP : X-000mm/Y-000mm, RIGHT, BOTTOM: X-110mm/Y090mm • Number of Images: Select how many images are on a page. (select number 4.) Copying_45 • Image Position: Select the position of a page which images are on. If you choose to copy four images, you have to select four positions here. -First Image Position: LEFT, TOP : X-000mm/Y-020mm, RIGHT, BOTTOM: X-100mm/Y-100mm -Second Image Position: LEFT, TOP : X-105mm/Y-020mm, RIGHT, BOTTOM: X-205mm/Y-100mm -Third Image Position: LEFT, TOP : X-000mm/Y-150mm, RIGHT, BOTTOM: X-100mm/Y-230mm -Forth Image Position: LEFT, TOP : X-105mm/Y-150mm, RIGHT, BOTTOM: X-205mm/Y-230mm 7 Press OK, the template you have saved will be shown in the template list table. 8 Press and select Copy. 9 Press the Advanced tab > ID Copy > Manual ID Copy >. 10 Press the template you have saved from the template list. 11 Press the Start button on the control panel. now follow the instruction on display to finish the ID copy for four images 2-up or 4-up copying (N-up) The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of paper. 2 or 4-up copying is available only when you load originals into the DADF. 121234 1. Place the originals face up in the DADF. Or place a single original face down on the scanner glass. (See "Loading originals" on page 33.) 2. Press Copy from the Main screen. 3. Select the tray in Paper Supply. 4. Press the Advanced tab > N-Up. 5. Select Off, 2Up, or 4Up. • Off: Copies an original onto one sheet of paper. • 2Up: Copies two separate originals onto one page. • 4Up: Copies four separate originals onto one page. 6. Press Start on the control panel. You cannot adjust the copy size using the Reduce/Enlarge for the N- Up feature. Poster copying Your original will be divided into 9 portions. You can paste the printed pages together to make one poster-sized document. This copy feature is available only when you place originals on the scanner glass. Each portion is scanned and printed on by one in the following order. This copy feature is available only when you place originals on the scanner glass. 1. Place a single original face down on the scanner glass. (See "Loading originals" on page 33.) 2. Press Copy from the Main screen. 3. Select the tray in Paper Supply. 4. Press the Advanced tab > Poster Copy. This feature is available only when the options in the Basic tab are selected as below; -Duplex to 1 -> 1 Sided -Reduce/Enlarge to Original(100%) -Paper Supply to Tray. 5. Press On to activate this feature. 6. Press OK. 7. Press Start on the control panel to begin copying. Your original is divided into 9 portions. Each portion is scanned and printed one by one in the following order: Clone copying The machine prints multiple original images on a single page. The number of images is automatically determined by the original image and the paper size. This copy feature is available only when you place originals on the scanner glass. 1. Place a single original face down on the scanner glass. (See "Loading originals" on page 33.) 2. Press Copy from the Main screen. 46 _Copying 3. Select the tray in Paper Supply. 4. Press the Advanced tab > Clone Copy. This feature is available only when the options in the Basic tab are selected as below; -Duplex to 1 -> 1 Sided -Reduce/Enlarge to Original(100%) -Paper Supply to Tray. 5. Press On to activate this feature. 6. Press OK. 7. Press Start on the control panel to begin copying. Book copying Use this feature to copy a book. If the book is too thick, lift the scanner lid until its hinges are engaged by the stopper and then close the scanner lid. If the book or magazine is thicker than 30 mm(1.18 inches), start copying with the scanner lid open. This copy fe...
Ce manuel est également adapté pour les modèles :Imprimantes - SCX-6545N/CAS (12.36 mb)
Imprimantes - SCX-6545N/KRA (12.36 mb)
Imprimantes - SCX-6545N/KRC (12.36 mb)
Imprimantes - SCX-6545N/KRD (12.36 mb)