Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
To make permanent changes, see page 104. Canceling a print job PRINT STOP To cancel a print job that the machine has received, press on the machine. The display will show the following message: 1: YES, 2: NO CANCEL PRINTING? Press to cancel the print job. 103 6. Printing Selecting Print Settings Selecting Print Settings The print settings are selected in the SHARP AM-900 Printing Preferences (“SHARP AM-900 Properties” in some versions of Windows). i To make temporary changes to the print settings, open the SHARP AM-900 Printing Preferences from an application as explained in Step 2 on page 103. The settings will remain in effect only while the application is running. i To make permanent changes to the print settings, open the SHARP AM900 Printing Preferences from the Printers and Faxes folder (the Printers folder in Windows .. Me/2000) as explained below: Windows .. XP: Click the start button, click Control Panel, click Printers and Other Hardware, and then click Printers and Faxes. In the Printers and Faxes window, click on the SHARP AM-900 icon and select Printing Preferences from the File menu. Windows .. 2000: Click the Start button, point to Settings, and select Printers. In the Printers window, click on the SHARP AM-900 icon and select Printing Preferences from the File menu. Windows .. Me: Click the Start button, point to Settings, and select Printers. In the Printers window, click on the SHARP AM-900 icon, and select Properties from the File menu. Selecting Print Settings Selecting Print Settings x Select the Paper Size and Paper Source. When the Paper Source is set to Tray, the Paper Size can be set to Letter or Legal. When the Paper Source is set to BypassTray, the Paper Size can be set to Letter, Legal, A4, A5, Envelope #10 (4 1/8” x 9 1/2”), Envelope Monarch (3 7/8” x 7 1/2”), Envelope DL, or A6. x In Page Layout, normally 1 Page per Sheet is selected. If you wish to print two reduced pages on each sheet of paper, select 2 Pages per Sheet. x For a normal document, set the Orientation to Portrait. If the document is oriented so that the width is longer than the height (like a landscape painting), select Landscape. x If you set Copies to a number greater than 1, use Output Order to select how the copies are ordered. The displayed page order changes depending on whether or not Collate is selected. Note: When printing from an application that has settings such as “Collate”, the application settings may override the above printer driver settings. 105 6. Printing Selecting Print Settings Selecting Print Settings The Advanced tab is used to specify how the printed image is scaled to the paper. Normally Match Page Size is selected so that the image size matches the paper size selected on the Page Setup tab (the image is not reduced). Selecting Print Settings x If you wish to scale the image to a smaller size, select Auto Scaling. The paper size setting on the Page Setup tab will appear in Current Page Size. Select the size to which you wish to scale the image in Output Size. The amount of the reduction will be shown in the page image. The following example shows reduction of a letter-size image to A4 size: 6. Printing 107 Printing on Envelopes and Cards Printing on Envelopes and Cards To print on envelopes, cards, and other special sizes of paper, use the bypass tray on the side of the machine. The bypass tray can be used to print on the following sizes: Letter Legal A4 A5 Envelope #10 (4 1/8” x 9 1/2”) Envelope Monarch (3 7/8” x 7 1/2”) Envelope DL (110 mm x 220 mm (4.33” x 8.66”)) A6 (European postcard) (105 mm x 148 mm (4.13” x 5.83”)) i Only one sheet (envelope, card, etc.) can be inserted at a time in the bypass tray. i Be sure to select the correct envelope or paper size in the Page Setup tab of the SHARP AM-900 Printing Preferences (or “Properties”) before printing. (Select Properties, Setup, or Printer from the Print dialog box to open the SHARP AM-900 Printing Preferences.) 1 Adjust the document guides on the bypass tray to the width of the sheet or envelope. Printing on Envelopes and Cards 2 Insert the sheet or envelope into the bypass tray as shown with the print side face down. x When inserting an envelope, the flap should be positioned on the left side as shown. Note: If you find it necessary to remove the sheet or envelope, press this release and open the side cover first. i After the sheet is inserted, the display will show the alternating messages “BYPASS PAPER! / IF COPY, PRESS “. The messages are only for copying and can be disregarded. 3 Select Print from the File menu of your application to open the Print dialog box. Click “Properties”, “Setup”, or “Printer” (the name of the button varies depending on the application) in the dialog box to open the SHARP AM-900 Printing Preferences (or “Properties”). Set the “Paper Source” to “Bypass Tray” on the “Page Setup” tab and then select the appropriate paper size. x Select other settings as needed and click OK. Click Print or OK in the Print ...