It cannot be positioned vertically or on a wall. Horizontal position Vertical position CAUTION Do not use the printer under the following conditions. • Locations subject to vibration or instability. • Locations that are very dirty or dusty. • Locations where the printer is not level. • The printer may fall and cause an injury. • The quality of printing may deteriorate. • Oriented other than as specified. • The printer may malfunction, be damaged, or cause an electric shock. —23— 3.6 Partition fo
However, factory settings differ depending on the destination market. CAUTION • The amount of paper remaining on the roll (diameter of the roll) depends on the type of paper used. • The paper roll diameters in the table are guidelines. Button to change paper near-end sensor (“A” and “B” are for horizontal installations, and “a” and “b” are for vertical or wall installations.) —24— 3.8 Setting Paper Thickness 3.8 Setting Paper Thickness Set the paper thickness selection lever to the thickness of
There is a separate collection systems for used electronics products in accordance with legislation under the WEEE Directive (Directive 2002/96/ EC) and is effective only within European Union. Wenn Sie dieses Produkt entsorgen wollen, dann tun Sie dies bitte nicht zusammen mit dem Haushaltsmüll. Es gibt im Rahmen der WEEE-Direktive innerhalb der Europäischen Union (Direktive 2002/96/EC) gesetzliche Bestimmungen für separate Sammelsysteme für gebrauchte elektronische Geräte und Produkte. Si vo
GENERAL OUTLINE CMP-20 is a compact, full featured portable line thermal printer, which can be used in a large variety of job environments. Bluetooth/WiFi communication with a PDA or similar device is useful for business activities at the point of sale or service. 1.1 Features • Compact and Robust • High speed and low noise emission of the line thermal printing • Long-life printing head with high reliability • Easy paper-handling, owing to the paper-drop-in style • Lithi um-ion rechargea
For information on how to save data, refer to the Command Reference. • Memory switch Setting of various kinds of functions can be stored in memory. Settings remain stored in the memory even if the printer is turned off. —16— 3. SETUP 3.1 Connecting the AC Power Cord 1. Turn off the power. 2. • For the built-in power type printer, connect the AC power cord to the AC inlet, and insert the plug into an electric outlet. • For the AC adapter type printer, connect the cable connector of the AC adapter
270mm (63.82 Lines/sec, 1/6inch feed) • 2color Max. 130mm (30.73 Lines/sec, 1/6inch feed) • Ladder Barcode: Mono 270mm/sec, 2Color 130mm/sec Paper feeding Speed • Approx. 270mm/sec Table 3-2 Thermal Printer Specification 2) 203 dpi Item Description Remark Model • SRP-F312 (TPH: KRC-80-8TA02-BIX2,KYOCERA CORPORATION) Print Method • Thermal Line Printing Dot Density • 0.125mm(8 Dots/mm) Printing Direction • Uni-direction with friction feed Printing Width •80.0mm, 640 dot Position Character / Line
22 3.5 Partition for 58-mm Wide Paper Roll ......................................... 23 3.6 Long Life Print (LLP) Function Settings ..................................... 24 3.7 Loading Paper .............................................................................. 25 3.8 Attaching the Power Switch Cover ............................................ 26 3.9 Installing the Driver and Utilities................................................26 4. MAINTENANCE AND TROUBLESHOOTING..................
Then press and hold the FEED button. The printer prints the contents of new setting and exits the memory switch setting mode to return to the normal standby state. * Unless saving the setting is executed, the changed setting cannot be enabled. 7. Initializing the memory switch When you want to return the memory switch setting to the initial state, go to “Save To Memory” in the above procedure. Here, open the printer cover and press and hold the FEED button till buzzer sounds. This allows the pri
*58 mm is only for label supporting model. 4. Change the setting of paper width by reffering to the section 5.2, "Manual Setting of Memory Switch". Partition Partition Scales 3.6 Setting DIP Switch CAUTION! When using 112 paper roll, the partition is not used. 3.5 Partition for Paper Roll At the time of shipment, this partition is not installed. 1. Confirm that the power switch is OFF. 2. Open the printer cover. 3. Insert the partition into the slot and align it with the scale inside of the prin
Print mode Batch mode Normal printing (single or multiple sheets) Tear off mode Feeds back media to the tear-off position after printing is completed. Cut mode*1 Prints while cutting at designated sheet units. The following two kinds of cut mode operations are done. • Backfeed • Cut through (Cut through refers to stopping present printing to cut the previous label when it reaches the cut position. After cutting, printing restarts but a gap may be created at the seam of the printing at this time.