Ground yourself by touching some metal, such as the printer's metal base, before touching the printhead. To replace the printhead: 1. Turn off the printer. 2. Open the cover. 3. Unlock the printhead by turning the retaining latch. ©2001 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved. 4. Press forward and down on the two latches on top of the printhead assembly as shown. The printhead will drop out. 2 6. Carefully unplug the cable from the printhead as show

............................ .................................................................................................................................................................................................................................................................................................................................................................................................................... ................................ Each product and program carries

When using narrow width labels (1.0”, 1.2”, or 1.5””) it is possible for coils of labels to slip over the front supply guide. This may jam the printer. Loose Coils of Labels Supply Guide Using the Optional Supply Guide Extension_ Using the optional supply guide extension (p/n 126286) keeps a new roll of narrow supply in line. Slide the extension down onto the front supply guide. Make sure the small tabs of the extension go between the outer slots of the front supply guide. Small Tabs AVERY

Although Avery Dennison has made every effort to provide complete and accurate information in this manual, Avery Dennison shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. .2007 Avery Dennison Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Avery Denniso

The print server is different in the NP and SNP printers, so commands may vary slightly. This guide lists the NP printer default settings, serial communication settings, and console commands with their SNP equivalents (if applicable). Information in this document supercedes information in previous versions. Check our Web site (for the latest documentation and release information. Printer Defaults The following table lists the radio frequency (RF) defaults for the NP and the SNP printers. Functio

Network Configuration............................................3-2 Additional Windows Configuration Methods................................................3-2 UNIX Network Configuration.....................................................................3-2 Berkeley UNIX Host Configuration.............................................................3-3 Sun Solaris Configuration.....................................................................3-HP/UX Configuration............................

User Manual Model 676 -LOKPRINT™ Machine Configuration 2 over 1, 1 over 1 & 2 over 0 AVERY DENNISON Manual Edition 3.0 20 August 2004 Manual Part Number 371389 This page intentionally blank User Manual Model 676 LOKPRINT® Contents Scope 1 Introduction................................................................................................................................1 Safety Issues / Warnings 1 Caution.....................................................................................

AB 1/08 ©2006 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved. Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Paxar reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Paxar has made every effort to provide complete and accurate information in this manual, Paxar shall not be liable for any omissions or inaccuracies. Any upda

On the printer: 1. Connect the printer to your computer’s Internet port through a network hub. 2. Press . 3. Enter the Manager Password and press Enter. The default password is 1234. The Configure screen appears. 4. Press Internet. 3-10 System Administrator’s Guide 5. Press the first numeric field and enter the first value for a valid Terminal (printer) IP address. 6. Press Enter. You return to the Internet Setup screen. 7. Press the next field for the IP address, enter the value, and press Ente

There are no attributes required. The xmlns: xis attribute is ignored. WriteTagData This tag contains one or more Item tags. There are no attributes required. The readerID attribute is ignored. Item This tag contains one FieldList tag or multiple TagID tags. There are no attributes required. The TagID tag is ignored. 6 Quick Reference FieldList This tag contains one or more Field tags, which may include one or more of the following attributes: format The default name of the format. This name mus