Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
Wipe the outside and inside surfaces of the kettle with a damp cloth. • If necessary, you may use a little household detergent. To clean the filter, see “Water filter” below. • If you use detergent inside the kettle, rinse thoroughly afterwards to remove all traces. • Ensure that all connectors and sockets are kept dry. • Do not immerse the kettle or power base in water or any other liquid. • Do not use harsh or abrasive cleaners or solvents. Descaling • Scale build-up will cause the element to overheat, reducing its working life. It may also cause the safety cutout to operate prematurely, switching the kettle off before the water actually boils. • As the kettle uses an under floor type element, lime scale can only build up on the walls and floor of the kettle, this is readily seen and should be promptly dealt with. Minimise Scale Build-up • Empty the kettle after each use; do not allow water to stand in the kettle overnight; use filtered water instead of tap water. • Descale the kettle regularly, at least once a month, using a proprietary brand of descaler. In areas of very hard water descaling may be necessary more often. • When descaling, follow the instructions on the packet of the descaler. When descaling has finished, empty the kettle and rinse it out numerous times with fresh water, then refill with freshwater, boil, and discard boiled water. Water Filter Depending upon the hardness of the water the scale particles that remain suspended in the water may give a cloudy appearance. The filter fitted to your kettle will help prevent these particles passing into your drink. You therefore must ensure that the filter is kept clean and clear of deposits, otherwise the performance of the filter may be affected, your drinks may contain scale and the water inside the kettle may look cloudy. • You should clean the filter whenever there are any obvious deposits left on the mesh and especially if pouring is affected. • To replace, align the sides of the filter with the grooves in the filter holder, and slide it slowly downwards and back into place. AFTER SALES SERVICE If the kettle is not working correctly, • You have followed the instructions correctly. • The plug fuse has not blown. • The main supply fuse/circuit breaker has not blown/tripped. If the powercord is damaged it must be replaced by a special cord set available from Dualit or an authorised Dualit service agent. This part should only be refitted by a competent electrician. If it still does not work, telephone the Dualit Customer Helpline on: + 44 (0) 1293 652 500 or the shop where you bought it. In the USA call Dualit Helpline: 973 623 9370 Any defect affecting the functionality of the appliance which becomes apparent within one year of its purchase will be corrected by free repair or replacement provided that it has been used and maintained in accordance with the instructions and has not been abused or misused in any way. This warranty does not cover any consequential damages. Your statutory rights are not affected. 6 • Make sure that your hands are clean and free from hand cream, soap or similar, which might leave a slight taint to the water. • Remove the kettle from the power base and ensure kettle is cold. • Open the lid. Hold the top of the filter and pull it gently up and out of the kettle. Rinse it under a tap whilst softly brushing it with a soft brush. Rinse the kettle out with fresh water. 5 check that: DUALIT LIMITED COUNTY OAK WAY TELEPHONE : +44 (0) 1293 652 500 GUARANTEE AND INSTRUCTIONS FOR DUALIT DOME KETTLE 1 Safeguards Before Use How To Use 2 Care And Cleaning After Sales Service Guarantee 3 5 4 6 GUARANTEE CRAWLEY WEST SUSSEX RH11 7ST FACSIMILE : +44 (0) 1293 652 555 EMAIL: info@dualit.com WEB: DDK110506 9088DomeKettle.qxp 5/12/2006 10:28 Page 2 Please read these instructions before using your kettle, keep them in a safe place for future reference. Carefully remove all packaging before use but keep the packaging until you are satisfied that the kettle is working correctly. 11 IMPORTANT SAFEGUARDS When using any electrical appliances, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS • To be protected against electrical hazards do not immerse the mains lead, plug, power base, or kettle in water or any other liquid. • Do not use in a bathroom or outdoors. • Use handles or knobs. Do not touch hot surfaces. • Do not open the lid when the water is boiling. • Take care when pouring – pour slowly, and do not over-tilt the kettle. • Water will remain hot for a considerable time after boiling and can present a scald hazard. Keep the kettle, power base and the mains lead away from the edge of worktops and out the reach of children. • Do not switch on unless the kettle contains at least 1 cupful of water. • Do not allow the mains lead to hang over the edge of the worktop, or anywhere it may accidentally be caught or tripped over. • Close supervision is necessary when any appliance ...