Évaluations - 4, GPA: 3.8 ( )

Fabricant : Wibur Curtis Company Taille : 970.99 kb Nom Fichier : 484a7e39-9986-473e-8603-95a8816dfc4f.pdf Langue d'enseignement:

FINDOUTMOREONTHEWEB. WILBURCURTIS.COMWILBUR CURTIS COMPANY Montebello, CA 90640 FIND OUT MORE ON THE WEB. WILBURCURTIS.COM MODELS INCLUDEDMODELS INCLUDEDMODELS INCLUDEDMODELS INCLUDEDMODELS INCLUDED ••••• TCTD-35 ••••• TCTD-35S ••••• PTTD-3 ••••• TCO-308 ••••• TCO-417 ••••• TCO-421 ISO 9001 REGISTERED C WARNING HOT LIQUID, Scalding may occur. Avoid splashing. Iced Tea Brewer Instructions Curtis ADS System is Factory Pre-Set and Ready to Go… Right from the Carton. Following are the Factory Settings for your Iced Tea Brewing System: • Brew Temperature = 204°F • Dilution = 2 Gallon • Concentrate = 1 Gallon • Drip Mode = 30 Seconds System Requirements • Water Source: 20 – 100PSI (Min Flow Rate of 1 GPM) • Electrical: See attached schematic for standard model or visit for your model. SETUP STEPS 1. Place unit at counter height. on a firm, level base, in such a way that it can be connected to water and power supply. 2. Connect water line to inlet fitting on valve. Water pressure entering brewer is required to be stable and must provide minimum of 1 gallon per minute. Use water regulator for constant pressure. Required water pressures, 20 to 100 psi. 2. Plug power cord into electrical outlet rated 20A. 3. Turn on toggle switch, behind unit. Heating tank will start filling. When the water reaches probe,heating element turns on automatically. 4. Heating tank will require 20 to 30 minutes to attain operating temperature. READY TO BREW indicator will light at this time. 5. Insert brewcone. Place empty tea container under brew cone. With water at operating temperature, run brew cycle, without tea, for about 1 minute. This clears the water lines of air. Stop the brew cycle by switching off at ON/OFF button. Discard water in tea container. This appliance is designed for commercial use. Any servicing other than cleaning and maintenance should be performed by an authorized Wilbur Curtis service center. • Do NOT immerse the unit in water or any other liquid • To reduce the risk of fire or electric shock, do NOT open top or front panel. No user serviceable parts inside. Repair should be done only by authorized service personnel. • Keep hands and other items away from hot parts of unit during operation. • Never clean with scouring powders, bleach or harsh implements. Important Safeguards/Conventions ConventionsConventionsConventionsConventionsConventions WWWWWARNINGS –ARNINGS –ARNINGS –ARNINGS –ARNINGS – TTTTTo help ao help ao help ao help ao help avoid personal injurvoid personal injurvoid personal injurvoid personal injurvoid personal injuryyyyy Important Notes/Cautions – from the factorImportant Notes/Cautions – from the factorImportant Notes/Cautions – from the factorImportant Notes/Cautions – from the factorImportant Notes/Cautions – from the factoryyyyy SanitaSanitaSanitaSanitaSanitation Requirementstion Requirementstion Requirementstion Requirementstion Requirements The National Sanitation Foundation requires the following water connecti...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :