Évaluations - , GPA: ( )

Instructions Follett, Modèle Horizon HCE1000AJS

Fabricant : Follett
Taille : 3.69 mb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

• Push ice transport tube onto icemaker nipple . • Install hose clamp . 5.1 Ice transport tube installation. DROP-IN • SATELLITE-FILL self-contained 11 Connect utilities to louvered docking assembly. External connections 6 . . . . . . • Remove access panel if necessary • Install drain line .. The rigid drain line from the icemaker must have at least 1/4" per foot pitch (6,4mm/0,3m). • Install icemaker potable water supply . • Replace access panel Air-cooled icemakers only • Remove access panel if necessary • Install drain line .. The rigid drain line from the icemaker must have at least 1/4" per foot pitch. • Connect cooling water supply . and return . • Install ice machine potable water supply . • Replace access panel 6.1 6.2 Water-cooled icemakers only 12 self-contained DROP-IN • SATELLITE-FILL Connect louvered docking assembly to icemaker. Internal connections 7 • Remove twist tie • Carefully pass plug thru opening and plug into wall outlet 7.3 Power cord . . • Slide icemaker into louvered docking assembly . • Insert ice transport tube all the way into coupling and tighten nut firmly . 7.1 Ice transport tube . . . . • Insert potable water line into valve . • Push drain line over hose barb on back of evaporator mount . 7.2 Potable water and drain lines Air-cooled icemakers – follow steps 7.1 through 7.4. • Position plate into opening and secure with supplied screw 7.4 Power cord CAUTION • Plug must be accessible after fi nal installation. • HCE1400A/W 230/50/1) requires a 20 amp circuit (4.00 mm2 wire) DROP-IN • SATELLITE-FILL self-contained 13 . . . . • Insert potable water line into valve . • Push drain line over hose barb on back of evaporator mount . 7.7 Potable water and drain lines In Out • Install icemaker cooling water lines to louvered docking assembly 7.5 Cooling lines . . • Slide icemaker into louvered docking assembly . • Insert ice transport tube into coupling and tighten nut firmly . 7.6 Ice transport tube Valve is preset at factory. Do not adjust. Adjustment will void warranty and may damage equipment. ATTENTION INSTALLER . . • Connect cooling water lines to icemaker . • Water valve is set at the factory. DO NOT remove seal or adjust water valve . 7.8 Cooling lines and power Water-cooled icemakers – follow steps 7.5 through 7.10. 14 self-contained DROP-IN • SATELLITE-FILL • Remove twist tie • Carefully pass plug thru opening and plug into wall outlet 7.9 Power cord • Position plate into opening and secure with supplied screw 7.10 Power cord Front cover Install front cover to icemaker. 8 . . • Slide icemaker cover over machine ensuring that tabs on back of cover slip under louvers on back of louvered docking assembly . • Insert and tighten two screws through cover and into louvered docking assembly . Normal front cover installation . . . CAUTION • Keep ventilation openings in the appliance enclosure clear of obstruction. • To ensure proper ventilation (if not using supplied grille) carefully review air circulation specifications i...