Évaluations - 3, GPA: 4.7
(
)
)
|
Facilité d'utilisation
bit warmer drawer. ¦ Phillips screwdriver Runners must be level, rigidly mounted and capable of supporting 150 pounds. 11 Installation of the warming drawer. Customer Service Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions Read these instructions completely and carefully. Advance Planning ¦ The warming drawer may be installed directly into a wall or wall oven cabinetry. ¦ The warming drawer may be installed below a countertop, a single or double oven and side by side using 2 drawers. ¦ When installing warming drawer with a cooktop allow a 2. minimum from bottom of a cooktop burner box to top of cutout. Grounding the Appliance ¦ Electrical power cord is located on the right side of the warming drawer. Locate the outlet within reach of the 56. long power cord in adjacent cabinet, within 42. of the right side or 16. from the left side of the cutout. A recessed receptacle can be installed on the right side of the cutout, 7. maximum from the back of the cabinet. IMPORTANT—(Please read carefully) FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED. Do not use an extension cord or adapter plug with this appliance. Follow National Electrical codes and ordinances. This warming drawer must be supplied with 120V, 60Hz, and connected to an individual, properly grounded branch circuit, and protected by a 15 or 20 amp circuit breaker or time delay fuse. A properly grounded 3-prong receptacle should be located within reach of the drawer’s 56. long power cord. Locate the receptacle in an adjacent cabinet. —within 42. of the right side or, —within 16. of the left side or —A recessed receptacle may be located on the right side of the cutout, 7. maximum from the back of the cabinet. In this location, the excess power cord should be coiled to the right side of the unit using the cord clip provided. Recessed receptacle 7. max. from rear on right side Drill 11.2. hole for power cord for left or right side outlet location IMPORTANT—(Please read carefully) The power cord of this appliance is equipped with a 3-prong (grounding) plug that mates with a standard 3-prong grounding wall receptacle to minimize the possibility of electric shock. The customer should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded and has the correct polarity. ¦ Where a standard 2-prong wall receptacle is encountered, it is the personal responsibility and obligation of the customer to have it replaced with a properly grounded 3-prong wall receptacle. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. DO NOT USE AN EXTENSION CORD. 12 Safety Instructions Operating Instructions Care and Cleaning Installation Instructions Troubleshooting Tips Customer Service Read these instructions completely and carefully. Remove Packaging and Parts Parts provided: n 4 Wood screws Place carton on a flat surface. Open one end of the carton and lift off the top piece. Lift the warming drawer up and out of the carton. Place the drawer on top of the shipping carton to protect the drawer front and the finished flooring. Remove all packing materials and tape. Locate package containing 4 wood screws and set aside. Installation Below a Countertop Electrical outlet 16. max. from left side Electrical outlet 42. max. from right side 11.2. Cabinet top 2. Min.* 25. 9. 7. 91.4. 231.2. Min. 36. Countertop height A Dimension A 27 . Drawer 30 . Drawer 25 1.2 . 28 1.2 . Electrical outlet flush with side of cabinet 7. max. Install 2x4 or 2x2 anti-tip block against rear cabinet wall 9” from floor to bottom of block * NOTE: When installing warming drawer with a cooktop allow a 2 . minimum from bottom of a cooktop burner box to top of cutout. ¦ When installed, the front face of the warming drawer will be nearly flush with cabinetry doors or drawer fronts. ¦ Drawer overlaps will conceal cut edges on all sides of the opening. The rough opening for the drawer must be: —Depth: 231.2. minimum from inside back to front of cabinet frame. —Width: 251.2. for 27. wide models 281.2. for 30. wide models. —Height: 91.4. ¦ 5. minimum above floor or 1. above toekick. 231.4. from floor to bottom of cutout is recommended for under countertop installation. NOTE: If you are installing in frameless cabinets, it may be necessary to install 1/2. wide cleats to accept drawer mounting screws. See drawer to find exact locations of mounting screws. When installed under a cooktop: Warming drawers are suitable for installation below only certain specified cooktop models. See the label attached to the top of the warming drawer for suitable models. 13 Installation of the warming drawer. Customer Service Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions Read these instructions completely and carefully. Installation Below Wall Ovens Installation below a single oven 231.2. Min. 1. Min. above...
Ce manuel est également adapté pour les modèles :Autres appareils de cuisine - JTD910BBBB (430.08 kb)
Autres appareils de cuisine - JKD910 (430.08 kb)
Autres appareils de cuisine - JTD910 (430.08 kb)
Autres appareils de cuisine - JTD910WBWW (430.08 kb)