Évaluations - 2, GPA: 4
(
)
)
|
Facilité d'utilisation
Read all instructions. 2. To protect against risk of electrical shock, do not immerse cord, plug or motor unit in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Call Rival® Customer Service (see warranty) to return for examination, repair, or electrical or mechanical adjustment. 7. The use of attachments not recommended or sold by Rival® may cause fire, electric shock or injury. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or contact hot surfaces, including the stove. 10. Do not open pressurized (aerosol-type) cans or cans of flammable liquids, such as lighter fluids. 11. SAVE THESE INSTRUCTIONS. POLARIZED PLUG defeat this safety feature. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts inside. Power Unit never needs lubrication. Do not attempt to service this product. Do not immerse base in water or other liquid. HOW TO OPEN CANS 1. Plug cord into 120 volt, AC outlet. 2. Raise piercing lever enough to wedge can between cutting blade and feed wheel as shown. 3. Press lever down all the way to pierce lid and start cutting action. “Power Pierce” feature: When you press lever, motor will start rotating can for easier piercing. 4. Let go of lever and can opener will continue cutting and will stop automatically when can has been opened. (It is normal for motor to occasionally continue cutting action for a few seconds after lid has been completely severed.) 5. To remove can, grasp it firmly and raise lever. Slide lid from magnet. piercinglever rim of can cuttingblade feed wheel PLEASE NOTE • To open cans over 2 lbs., hold top of can opener to stabilize it. • Unit will not open rimless cans. • If there is a dent in the rim of the can, open other end. • Never open or eat the contents of a bulging can. HOW TO SHARPEN KNIVES Do not attempt to sharpen hollow ground blades or those with serrated edges. 1. Be sure knife is clean and free of grease. 2. Place heel of knife into the guide slot located on the back of the can opener. Lightly draw the blade towards you, applying a slight downward pressure. Repeat this procedure four to five times to put on a “factory sharp” edge. HOW TO CLEAN BLADE ASSEMBLY Never submerge can opener in water. 1. Unplug cord. 2. Wipe can opener with a damp cloth. Clean around blade area with toothpick or cotton swab if necessary. HINT: Cutting mechanism may collect food or p...
Ce manuel est également adapté pour les modèles :Autres accessoires pour la maison - CN763 (92.64 kb)