Évaluations - , GPA: ( )

Instructions Waterpik Technologies, Modèle Cascadia CF-203C

Fabricant : Waterpik Technologies
Taille : 246.28 kb
Nom Fichier :

Langue d'enseignement:

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

Le document est chargé, s'il vous plaît patienter

Téléchargez votre Fermer

b Confirm the hose is properly installed, try switching ends. c Confirm there is only one washer in the pivot ball. Low water pressure or missing spray patterns a Clean shower head in vinegar/water solution. (See care section). b Clean screen and flow regulator. Leaking at pipe pivot ball connection: a Confirm one single washer is seated on top of the screen. b Grate bar of soap across the j-pipe threads to act as a sealant. Showerhead and/ or bracket stiff to change angle a Immerse pivot ball and large nut of the bracket in hot water or use a blow dryer for several minutes and then use a towel to loosen the large nut. For Fixed Mount: install FM shower head to provide additional leverage to change angle of spray. (Contact Waterpik for further assistance). Care and Cleaning Clean the filter screen at least once a year, or when you notice a drop in water pressure. To remove, unscrew the nut from the pipe. Remove the screen by turning it counter-clockwise (pliers may be used) and rinse. If you remove the flow regulator, be sure you reinstall it with the black O-ring facing out. • Cleaning is required when mineral deposits appear on the spray holes to maintain proper working conditions. • Clean the flexible nozzles by rubbing with a finger or soft bristled toothbrush. Clean by soaking in household vinegar. • Do not clean or rinse any part with harsh chemicals, heavy-duty cleaners or abrasives. This may damage parts or finish and may void the warranty. Limited Lifetime Warranty Water Pik, Inc. warrants to the original purchaser of this product that it is free from defects in material and workmanship for as long as the original purchaser owns this product. Water Pik, Inc. will replace any part of the product which in our opinion is defective, provided that the product has not been abused, misused, altered or damaged after purchase. (This includes damage due to use of tools or harsh chemicals.) In the event an item has been discontinued we will replace with what we deem to be the closest product. Water Pik, Inc. is not responsible for labor charges, installation, or other consequential cost. The responsibility of Water Pik, Inc. shall not exceed the original purchase price of the product. This warranty gives you specific legal rights. You may also have other rights that vary where you reside. Save your receipt as proof of purchase is required for warranty action. Have any questions or need assistance? If in the U.S., call our toll-free Customer Assistance Line, 1-800-525-2774outside the U.S., write us at: Water Pik, Inc. 1730 East Prospect Road Fort Collins, CO 80553-0001 USA Waterpik® (stylized) is a trademark of Water Pik, Inc. registered in the EU, Switzerland, Mexico, Canada, and United States. Waterpik® is a trademark of Wa...