Évaluations - 1, GPA: 4 ( )

Fabricant : Alvin Taille : 49.21 kb Nom Fichier : Langue d'enseignement:

For your own safety, use gloves when handling glass. Place the glass on top of the Plexiglas sheet and replace the aluminum strips. 2. To operate, depress the on/off switch and hold for one or two seconds until the lights illuminate. Note: Bulbs may loosen during shipping. If bulbs don't illuminate check that they are properly seated in fixture. 3. The Satin-Glow Lightbox is designed to operate on 110V AC, 60 cycle. Please do not use any other power source. 4. Removal of the back panel or tampering with the electrical circuitry will void the warranty and releases the manufacturer from all responsibility for damages, loss of property and/or personal injury. To Replace Fluorescent Tubes 1. "Daylight" bulbs with CRI of 70 or greater are recommended. Always use direct replacement lamps in order to prevent overheating. 2. Disconnect the power cord. 3. Remove the screws and aluminum strips from the top surface of the lightbox. Carefully remove glass and Plexiglas panels. Degrees of Illumination MODEL No. Lumens Tubes Lumens at per Tube per Box Light Box Surface LB1218 650 1 F15T8 650 LB1620 650 2 F15T8 1300 LB1824 650 2 F15T8 1300 LB2436 1750 3 F30T8 5100 All electrical components are U.L. listed. 4. Remove the hold-down screws and lift off the light diffusers. 5. Remove and replace fluorescent tubes. 6. Return diffusers, glass and Plexiglas panels to their original positions. Re-install aluminum strips and screws. T y Alvin & Company, Inc. Bloomfield, CT Grand Prairie, TX www.alvinco.com...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :