Évaluations - 3, GPA: 3 ( )

Fabricant : Toastmaster Taille : 57.42 kb Nom Fichier : Langue d'enseignement:

POLARIZED PLUG: This appliance has a polarized plug, (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. THIS PRODUCT IS FOR HOUSEHOLD USE ONLY 2 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS FIGURE 1 FIGURE 2 Lever Guide Bar Geared Wheel Cutting Blade Knife Sharpener Scissors Sharpener Cord Storage FIGURE 3 Pivot Hole Pivot FIGURE 4 USING THE CAN OPENER See CARE AND CLEANING for assembly instructions. 1. Remove all packaging materials before using. 2. Place the can opener on a level surface and plug into 120V~60 Hz electrical outlet. 3. Hold can approximately level. 4. Raising lever, place can under guide bar and against geared wheel, see Figure 1. 5. Press down on lever to pierce lid of can. This also starts the cutting action. Let go of lever and can will stop automatically when opened. 6. Grasp the can, then raise the lever up from the can. 7. Slide the lid away from the magnet. Use caution to avoid injury from sharp edge of lid. HINT FOR USING THE CAN OPENER • To open extra tall cans, place can opener at edge of counter before wedging can in position for opening. USING THE KNIFE AND SCISSOR SHARPENER Turn the unit sideways so that the knife and scissors sharpener is to your right (see Figure 2). 1. Press down and hold lever. 2. Place blade lightly in either the left or right groove of the knife sharpener. Draw knife slowly toward you with a slow, even motion. 3. Place blade in other knife sharpener groove and repeat 4 or 5 times, alternating from one groove to the other until desired sharpness is achieved. Release lever. 3 4. 4. 5. Wash and dry blades after sharpening. HINTS FOR USING KNIFE/SCISSOR SHARPENER • Be sure that blades are clean and free of grease. Greasy or wet blades may coat the grinding wheel and the blade will not sharpen satisfactorily. • Do not attempt to sharpen hollow ground or serrated blades. • If the knife has a curved tip, raise the knife handle slightly at the end of each sharpening. • Uneven sharpening may occur if you force the knife blade against the Grinding Wheel. Do not use the can opener, knife or scissors sharpener for more than 5 minutes at a time. Allow to cool for at least 15 minutes after sharpening blades before using. This will prevent motor burnout due to overheating. CARE AND CLEANING Unplug the unit from electrical outlet. 1. To remove lever, hold the can opener facing you. Lift the lever upward to the highest position (as shown in Figure 1) and push the lever to the right. 2. Wash lever in warm, soapy water and wipe the outside surfaces of the unit with a damp cloth. 3. To replace the lever, hold the can opener facing you with the lever in the lifted position and slide the pivot into the pivot hole. Push the lever to the left...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :