Évaluations - , GPA:
(
)
)
Fabricant : Strong Pools and Spas
Taille : 789.53 kb
Nom Fichier : 5884c3c2-1a13-4310-a382-325d4ed8daec.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
If the mineral content deviates from prescribed pH level (7.2-7.8) deposits on the spa walls, filter, electric heating element or gas heater manifold and piping may adversely affect the condition of your spa equipment. Since the water capacity of your spa is far less than that of a swimming pool, the chemical reaction caused by the presence of one or more persons in the spa is more rapid and pronounced. In other words, it is much more difficult to maintain the proper pH balance in a spa than in a swimming pool. For these reasons, it is important to check frequently, the total alkalinity of the water, the pH level, and the sanitize level, then add prescribed chemicals as necessary to maintain the proper chemical balance. Failure to maintain a proper balance of chemicals in your spa will result in an early, premature failure of your spa parts including, but not limited to, the spa cover, piping, certain electrical components in the spa, electrical control box and topside panel, thus voiding the warranty. ESSENTIAL CHEMICALS AND THERE USE The following information on chemical use for spa maintenance is provided strictly as a guide for the spa owner and may or may not be appropriate to maintain your spa correctly and may, under certain conditions, be harmful to your spa and/or persons using the spa. Always check with your pool and spa dealer to determine which chemicals and/or proce dures they recommend to maintain your spa correctly. STRONG POOLS and SPAS does hereby claim no responsibility or liability for use of and quantities of the chemicals listed. 9 Spa Maintenance CONCENTRATED CHLORINATING GRANULES - The minimum chlorine level in the spa should be at least 2PPM (parts per million). Chlorine level should be tested frequently and the chemical added to maintain a safe level of 2PPM. This type of chemical can be added in quantities of 0.5 ounce per 500 gallons of spa water. Check the chlorine level at least seven hours or more after adding to determine the full effect of the added chemical. Liquid chlorine is not recommended. ORGANIC POLYMERS - are used in various forms. These chemicals clear up cloudy or dirty water appearance and prevent calcium deposits on the inside spa finish, plumbing and heating equipment. Use as recommended by the manufacturer. METAL GON - or its equivalent is a chemical that will prevent iron in the spa water from staining the spa finish. This chemical is added to the spa water when the spa is filled for the first time or when refilled. Use as recommended by the manufacturer. SILICONE EMULSION - quickly and effectively disperses foam and is completely compatible with the other chemicals listed. Use as recommended by the manufacturer. SPA WATER - should be changed periodically, depending upon frequency of use and other conditions that may affect water suitability. Typically 60 to 90 days is a satisfactory interval under normal conditions. With heavy usage, the interval between water changing should be less. SPA FILTER CARTRIDGE - should be cleaned every 2 to 4 weeks depending on the frequency of use. Rinse the filter cartridge with a pressure hose and re-install filter cartridge in the filter housing. When changing spa water it is good practice to soak the filter cartridge in filter cleaner. The filter cleaner is specially made to remove accumulation of oils and other contaminates which will ensure good, sanitary water and extended filter cartridge life. ADDING CHEMICALS - to your spa water: Add to the center of the spa with the pump and the air blower (bubbles) operating simultaneously. Make sure the water is heated. Never add chemicals to cold water, as this will effect chemical action. Also, never add chemicals directly into the skimmer. Store all chemicals in a cool, dry place and in such a way as to prevent children and pets from contacting. 10 Jets, Valves, Injection and Suction Directional Jet 2” Turncounterclockwisetoopen Turncounterclockwisetoopen Center Pivots Directional Jet 3” Center Pivots Turncounterclockwisetoopen Top Air Control Valve (Air Control Valve should be turned off when spa is not in use. The spa will heat up faster.) Bottom Suction 11 WARRANTIES LIFETIME ON THE SHELL The Cyprus Spa is forge-cast from authentic granite resin and is warranted for the life of the spa to the original owner. ONE YEAR ON CONTROL EQUIPMENT AND PLUMBING The control equipment (power pack, heater, pump/motor) is warranted against defects in materials and/or workmanship for a period of one year on parts. The plumbing (including fittings) is warranted against leaking due to defects in materials and/or workmanship for a period of one (1) year on parts. Ozone Generator System – is warranted against defects in materials and/or workmanship for a period of one (1) year on parts. Warranty extends only to the original purchaser. Warranty does not apply to breakage due to obvious misuse. NOTE: the warranty begins from the date of delivery and is only valid to the original owner. The warranty d...