Figure 2 - DMX connector configuration DMX Quick Reference Chart DMX Address Quick Reference Chart Dip Switch Position DMX DIP SWITCH SET #9 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0=OFF #8 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1=ON #7 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 X=OFF or ON #6 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 #1 #2 #3 #4 #5 0 0 0 0 0 32 64 96 128 160 192 224 256 288 320 352 384 416 448 480 1 0 0 0 0 1 33 65 97 129 161 193 225 257 289 321 353 385 417 449 481 0 1 0 0 0 2 34 66 98 130 162 194 226 258 290 322

Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. AC Power This fixture has an auto-switching power supply that can accommodate a wide range of input voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage you are applying is within the range of accepted voltages. This fixture will accommodate between 100 V and 2

Should any other connections be required they must be carried out with the following configuration. Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-pin type i.e. with Earth/Ground connection. In the UK, it is required that all mains plugs are fitted with 5A fuses. Technical Specifications Power 120V~60Hz AC 230V~50Hz AC Fuse 20mm Glass 8A Fast Blow 20mm Glass 4A Fast Blow Preheat Time 4 minutes Fog Output 3,500 cu ft per

Optional Controllers • Timer Remote • Wireless remote Power Connections The unit is supplied with a power plug connections be required they must be Earth = Green/Yellow cable Neutral = Blue cable Live = Brown cable In the USA & Europe, it is required that all plugs are 3-In the UK, it is required that all mains plugs are fitted with Power 120V~60Hz AC 230V~50Hz AC Fuse 20mm Glass 7A Fast Blow 20mm Glass 4A Fast Blow Preheat Time 4 minutes Fog Output 3,000 cu ft per minute Tank Capacity 1 Liter /

RIGGING It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs. • When selecting installation location, take into consideration lamp replacement access and routine maintenance. • Safety cables should always be used. • Never mount in places where the fixture will be exposed to rain, high humidity,

No infra-red or UV emissions . Up to 100,000-hour LED life span . Master/Slave mode (requires COLORmist Power unit) . MIST-PAR80 and MIST-PANEL require the COLORmist Power unit for operation . Also links with COLORmist CHANNEL FUNCTION 1 Program mode 2 Red / Run Speed 3 Green / Flash Speed 4 Blue / Select Color COLORmist System User Manual 4 2005-10-10/18:36 Operating Instructions COLORmist. System User Manual 5 2005-10-10/18:36 SEGMENT BUTTONS BUTTONS Menu Returns to Main Menu Setup Enter menu

4 FEATURES.......................................................................................................................................................................................................................4OMIST-CON DMX CHANNEL SUMMARY............................................................................................................................................................................4OPRODUCT OVERVIEW.......................................................

PanelO MIST-CON COLORmist. ControllerO MIST-PS8 COLORmist. Power UnitO USER MANUAL CHAUVET, 3000 N 29th Ct, Hollywood, FL 33020 U.S.A (800) 762-1084 .(954) 929-1115 FAX (954) 929-5560 2005-10-10/18:36 Table of Content BEFORE YOU BEGIN....................................................................................................................................................... 3 COLORMIST. SYSTEM...............................................................................................

Choosing Single Action Programs 1. Press the MODE button until the display shows .M System Setup.. 2. Press the UP button to arrive at .M Single Action.. 3. Press the SETUP button to enter menu function. 4. Press the UP and DOWN buttons to toggle built in programs. Press SETUP button to choose the presently viewed program number. 5. Upon selecting the program, the menu will immediately display whatever modifier may exist for that individual program selected. It can display .Flash Speed: 100.or .

3 WHAT IS INCLUDED ..................................................................................................................................................................................... 3 UNPACKING INSTRUCTIONS ......................................................................................................................................................................... 3 SAFETY INSTRUCTIONS ..................................................................................