Log:
Téléchargements : 1   Taille : 336 kb   Fabricant : Arboria  
Catégorie : Autres accessoires pour la maison
@name

These can be mounted to either the side or back of the Base Panel. Placement of Stakes If mounting the Stakes on the back of the Base Panel, drive the first stake 14” to 18” into the ground in the desired location. Be sure to position the stake such that the top edge of the “U” shaped stake faces the Panel. Measure 34” apart from this first stake and then drive your second stake 14” to 18” into the ground. If mounting the Stakes on the side of the Base Panel, drive the first stake 14” to 18”

Téléchargements : 0   Taille : 80 kb   Fabricant : Arboria  
Catégorie : Autres accessoires pour la maison
@name

Center the middle rail and secure using 1 5/8” screws. SEAT AND BACK TO ARBOR ASSEMBLY STEP 2 » Determine the height you prefer for the bench seat, usually from 16” to 18” above ground. » Deduct 4 3/4” from the height and mark that height on each “leg” of the arbor, this will locate the bottom of the seat support. » Drive nails in each of the arbor posts at the marked places. » Rest the seat on the projecting nails, line it up front and back with the arbor posts. » Hold the seat firmly t





catégories