Évaluations - 1, GPA: 5
(
)
)
|
Facilité d'utilisation
1 Hammer Head w/Coil Spring............................. 1 Die 7.8"-Shaft 1"-Radius...................................... 1 Die 7.8"-Shaft 2"-Radius...................................... 1 Die 7.8"-Shaft 3"-Radius...................................... 1 Hex Wrench 4mm.............................................. 1 Hex Wrench 5mm.............................................. 1 Figure 1. Model G0711 Planishing Hammer. MODEL G0711 PLANISHING HAMMER INSTRUCTION SHEET This machine can cause serious personal injury if used incorrectly. To reduce this risk, read and understand these instructions before using! The Model G0711 has a maximum operating pressure of 100 PSI. Exceeding this pressure can lead to an explosion, which may cause serious personal injury! INJURY HAZARD! Disconnect tool from air supply whenever servicing or adjusting machine! EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection while using this tool! CRUSHING HAZARD! Keep hands clear of hammer at all times! Specifications Control Power..................................... Pneumatic Throat Depth................................................ 19 5.8" Hammer/Die Opening (Usable)................3.8"–1 1.4" Maximum Opening (Loading/Unloading)........... 4" Maximum Workpiece Thickness......... 5.64" (2mm) Hammer Speed........................... 875–1350 BPM Operating Air Pressure....................... 50-100 PSI Maximum Air Pressure............................ 100 PSI Air Inlet Size, Consumption.........1.4" NPT, 4 CFM Overall Dimensions.......... 23" L x 5 1.2" W x 24" H Weight.........................................................35 lbs Cop yright © AUGUST, 2010 By Gri zzly Industrial , Inc . Warning : No portion of this manual may be reproduced in any shape Or form without the written appro val of Grizzly Industrial , inc . (FOR MACHINES MFG. SINCE 7/10) #TR13227 Printed in CHINA NOTICE If you have any questions about this machine, please call or write us. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 E-Mail: techsupport@grizzly.com READ THIS MANUAL. This tool may cause per-SHARP SURFACES. DO NOT place hands near sonal injury if used incorrectly. Read this manual the tooling surfaces when in operation. for proper safety and operating instructions to reduce this risk. REMOvE ADJUSTING KEYS AND WRENCHES AFTER USE. These tools become dangerous WEAR EYE PROTECTION. This tool may throw projectiles if left on the tool when it is started. small fragments during operation, which may cause serious eye injury. Always wear ANSI AvOID FLAMMAbLES. Do not use around flamapproved safety glasses or face shield to reduce mables that may be ignited by sparks. your risk from this hazard. SECURE WORK. Use clamps or a vise to hold WEAR A RESPIRATOR. This tool may produce work when practical. Otherwise, use both hands fine dust during operation, which can cause respi-when shaping workpiece. ratory injury if inhaled. Always wear a respirator NIOSH approved for the type of material being MAINTAIN TOOLS WITH CARE. Keep tools processed. lubricated and clean for best and safest perfor mance. WEAR HEARING PROTECTION. This tool is very loud during operation and can cause per-DO NOT FORCE TOOL. It will do the job better manent hearing loss. To reduce your risk, always and safer at the rate for which it was designed. wear hearing protection, such as ear plugs or ear muffs while operating. CHECK FOR DAMAGED PARTS bEFORE USING. Check for binding and alignment of parts, MAINTAIN SAFETY GUARDS. your tool may be broken parts, part mounting, loose bolts, and any equipped with safety guards or other structural other conditions that may affect operation. Repair components designed to reduce the risk of injury or replace damaged parts before operating. during operation. Never modify or operate this tool with any guards or components removed or USE GOOD LIGHTING. Keep work area well damaged. lighted. Dark work areas increase risk of injury. KEEP CHILDREN AWAY. Children can injure AvOID UNINTENTIONAL OPERATION. Always themselves with this tool. Disconnect and lock the disconnect air when not in use. tool away when not in use. USE RECOMMENDED ACCESSORIES. Using AvOID ENTANGLEMENTS. Do not wear loose improper accessories may increase risk of injury. clothing, gloves, neckties, rings, bracelets, or other jewelry that may be caught in moving parts. NEvER ALLOW UNTRAINED USERS TO USE Wear a hair covering to contain long hair. THIS TOOL WHILE UNSUPERvISED. USE CORRECT AIR PRESSURE. Exceeding the IF YOU ARE UNSURE OF THE INTENDED maximum PSI rating of this tool may cause unpre-OPERATION, STOP USING TOOL. Seek formal dictable operation or bursting. training or research books or magazines that spe cialize in pneumatic tools. DISCONNECT AIR PRESSURE before servicing, changing accessories, or moving to another bE AWARE OF HOSE LOCATION. Hoses can location. Never leave this tool unattended when become a tripping hazard when laid across the c...