Évaluations - 3, GPA: 3.7
(
)
)
|
Facilité d'utilisation
Secure the junction box cover. 8. Attach a NEMA 6-15 plug (see Figure 5) to the end of the power cord. Make sure the plug grounding prong is attached to the equipment-grounding wire inside the power cord. GROUNDED 6-15 RECEPTACLE Current Carrying Prongs 6-15 PLUG Grounding Prong Figure 4. Model G0443 remote magnetic switch wiring. Figure 5. NEMA 6-15 plug and receptacle. Install the matching NEMA 6-15 receptacle, making sure that it is properly connected to the 220V circuit and is grounded in accordance with all local codes and ordinances. Model G0443 (Mfg. Since 11/09) -11- SECTION 3: SETUP Awarning This machine presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and operations before starting the machine! Awarning This machine and its components are very heavy. Get lifting help or use power lifting equipment such as a forklift to move heavy items. Unpacking Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult. When you are completely satisfied with the condition of your shipment, inventory the contents. Needed for Setup The following are needed to complete the setup process, but are not included with your machine. Description...................................................Qty • Safety Glasses..............................................1 • Additional People..........................As Needed • Power Lifting.................................As Needed • Screwdriver Phillips #2..................................1 • Wrench or Socket V2"....................................2 • Wrench or Socket 9/i6M...................................2 Model G0443 (Mfg. Since 11/09) Awarning SUFFOCATION HAZARD! Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately. -12- 0 Inventory Hardware (continued) —Lock Washers 3/s" —Flat Washers 3/s". ..4 20 The following is a description of the main components shipped with your machine. Lay the components out to inventory them. If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store. Inventory (Figure 6) Qty A. Intake Cylinder...........................................1 B. Cyclone Funnel..........................................1 C. Intake Barrel...............................................1 D. Canister/Drum Collection Bags.........1 Each E. Gray Flexible Hose 7" X 32"......................1 F. Motor/Blower Housing Assembly...............1 G. Collection Drum Lid....................................1 H. Collection Drum..........................................1 I. Collection Drum Seal.................................1 J. Clear Flexible Hose 9" x 8"........................1 K. Hose Clamps 9".........................................2 L. Outlet Port..................................................1 M. Filter L-Braces............................................2 N. Foam Tape Roll 3 x 6mm ..........................1 O. Hose Clamps 7".........................................2 P. Hose Clamp 6"...........................................1 Q. Wall Mount Bracket....................................1 R. Casters.......................................................4 S. Wall Mount Brace.......................................1 T. Barrel Gaskets............................................2 U. Brace Gaskets............................................2 V. Outlet Gasket.............................................1 W. Canister Filter Assembly............................1 X. Hose Clamps 1 V......................................2 Y. Vacuum Hose 1V x 98"............................1 Z. Collection Drum Vacuum Ring...................1 AA. Cyclone Vacuum Tube...............................1 Hardware (Not Shown) —Phillips Head Screws #10-24 x 3/s"..........6 —Hex Nuts #10-24.....................................6 —Drum Latches.........................................3 —Roll of Foam Tape 3 x 15mm.................1 —Hex Bolts 5/i6"-18x 1"............................24 —Hex Bolts 5/i6"-18 x 3/4"...........................24 —Flat Washers 5/ie"..................................68 —Fender Washers 5/ie"...............................4 —Hex Nuts 5/i6"-18....................................24 —Hex Bolts 3/s"-16x 1"...............................6 —Hex Nuts 3/s"-16.....................................10 Figure 6. Model G0443 inventory. Model G0443 (Mfg. Since 11/09) -13- Site Considerations Weight Load Refer to the Machine Data Sheet for the weight of your machine. Make sure...
Ce manuel est également adapté pour les modèles :Autres outils - G0443 (2.68 mb)