Évaluations - 3, GPA: 4
(
)
)
|
Facilité d'utilisation
High-pressure fluid can be forced under the skin resulting in serious injury. Do not use on logs longer than 25” or 12. with a diameter greater than 8”. Wear ANSI-approved safety goggles, 13. heavy-duty work gloves, steel-toe work boots and hearing protection during use. Do not operate in explosive atmo14. spheres, such as in the presence of flammable liquids, gases, or dust. Gasoline-powered engines may ignite the dust or fumes. Stay alert, watch what you are doing 15. and use common sense when operating this piece of equipment. Do not use this piece of equipment while tired or under the influence of drugs, alcohol or medication. Do not overreach. Keep proper foot16. ing and balance at all times. This enables better control of the equipment in unexpected situations. Dress properly. Do not wear loose 17. clothing or jewelry. Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Parts, especially exhaust system 18. components, get very hot during use. Stay clear of hot parts. Do not cover the engine or equipment 19. during operation. Keep the equipment, engine, and sur20. rounding area clean at all times. Use the equipment, accessories, etc., 21. in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation. Do not operate the equipment with 22. known leaks in the engine’s fuel system. This product contains or, when used, 23. produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.) When spills of fuel or oil occur, they 24. must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container. Keep hands and feet away from 25. moving parts. Do not reach over or across equipment while operating. Before use, check for misalignment 26. or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment. Use the correct equipment for the 27. application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended. Service precautions Before service, maintenance, or 1. cleaning: Turn the engine switch to its a. “OFF” position. Allow the engine to completely b. cool. Then, remove the spark plug c. wire(s) from the spark plug(s). Keep all safety guards in place and in 2. proper working order. Safety guards include muffler, air cleaner, mechanical guards, and heat shields, among other guards. Do not alter or adjust any part of 3. the equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed. Wear ANSI-approved safety goggles, 4. heavy-duty work gloves, and dust mask/respirator during service. Maintain labels and nameplates on 5. the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Have the equipment serviced by a 6. qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly. Store equipment out of the reach of 7. children. Follow scheduled engine and equip8. ment maintenance. Refueling:9. Do not smoke, or allow sparks, a. flames, or other sources of ignition around the equipment, especially when refuelling. Do not refill the fuel tank while the b. engine is running or hot. Do not fill fuel tank to the top. Leave c. a little room for the fuel to expand as needed. Refuel in a well-ventilated area only.d. Save these instructions. Basic Specifications Fuel Type 89+ octane unleaded gasoline Capacity 1 Gallon Equipment Lubricant Type 5W30 (above 32° F) 10W30 (at 32° F or below) Capacity 1.1 Quarts Hydraulic Fluid 2.5 Gallons Rotation viewed from PTO (power takeoff - the output shaft) Counterclockwise Maximum Log Size 25” Long x 8” Diameter Tire Air Pressure 60 PSI (cold) Note: Engine specifications are found in the engine manual supplied with this equipment. Unpacking When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Set Up Instructions Read the entire Important Safety Information section at the beginning of this manual including all text...