Log:
Évaluations - 3, GPA: 4.3 ( )

Instructions Avanti, Modèle AVANTI WCV42DZ

Fabricant : Avanti
Taille : 1010.23 kb
Nom Fichier : wbv21dz_-_wcv42dz1.pdf
Langue d'enseignement: enes
Aller à la télécharger



Facilité d'utilisation


Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded. This appliance requires a standard 115/120 Volt AC ~/60Hz electrical ground outlet with three-prong. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be secured behind the appliance and not left exposed or dangling to prevent accidental injury. The appliance should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. This provides the best performance and also prevent overloading house wiring circuits that could cause a fire hazard from overheated. Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from the receptacle. Repair or replace immediately all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end. When moving the appliance, be careful not to damage the power cord. .Warning. Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. . EXTENSION CORD Because of potential safety hazards under certain conditions, it is strongly recommended that you do not use an extension cord with this appliance. However, if you must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at least 10 amperes. INSTALLATION INSTRUCTIONS . BEFORE USING YOUR WINE CHILLER • Remove the exterior and interior packing. • Check to be sure you have all of the following parts: Model WBV21DZ Wine / Beverage Center Model WCV42DZ Dual Zone Wine Chiller 1 Instruction Manual 1 Instruction Manual 5 Wine Bottle Shelves (Wire) 10 Wine Bottle Shelves (Wire) 1 Wine Bottle Shelf / Basket (Wire) 2 Wine Bottle Shelf / Basket (Wire) 3 Beverage Shelves (Glass) 4 Keys 1 Storage Basket (Wire) 4 Keys • Before connecting this appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewarm water using a soft cloth. . INSTALLATION OF YOUR WINE CHILLER • This appliance is designed to be for free standing installation or built-in (fully recessed). • Place your Wine Chiller on a floor that is strong enough to support it when it is fully loaded. To level your Wine Chiller, adjust the front leveling legs at the bottom of the Wine Chiller. • Locate the Wine Chiller away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly. • Avoid locating the unit in moist areas. • Plug the Wine Chiller into an exclusive, properly installed-grounded wall outlet. Do not under any circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician or an authorized Avanti Products service center. . BUILT – IN CABINET INSTRUCTIONS This unit is designed for both built-in or free standing installation. If you plan to use this unit in a built- in application please follow the requirements shown to the right. Cabinet Opening Dimensions IN (min) CM (min) Width 24” 61 cm Depth 24” 61 cm Height 34 .” 87.6 cm MODEL WBV21DZ OPERATING YOUR WINE & BEVERAGE CENTER It is recommended you install the appliance in a place where the ambient temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is above or below recommended temperatures, the performance of the unit may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees Fahrenheit may not be reached. Temperature Ranges by Side / Zone WINE Chiller (LEFT SIDE) 45. - 65. F 7. - 18. C BEVERAGE COOLER (RIGHT SIDE) 34. - 43. F 1. - 6. C Recommended Temperatures for Chilling Wine. Red Wines 58 - 65 .F 14 - 18 .C Dry / White Wines 48 - 57 .F 10 - 13 .C Rose Wines 49 - 51 .F 9 – 11 .C Sparkling Wines 40 - 47 .F 5 - 8 .C Wine Chiller (Left Side / Zone) Control Panel Beverage Center (Right Side / Zone) Control Panel You can select temperature display setting from Fahrenheit to Celsius degree by pushing the .F/.C button/mark. Fahrenheit or Celsius degrees indicator will appea...

Ce manuel est également adapté pour les modèles :
Autres outils - AVANTI WBV21DZ (1010.23 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories