SAVE THESE INSTRUCTIONS Safety Instructions • Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. • Use the laser only with the specifically designated batteries. Use of any other batteries may create a risk of fire. • Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the hands of untrained users. • Use only accessories that are recommended by the manufacturer for your model. Accessories tha

B l a c k a n d D e c k e r. c o m / N e w O w n e r to register your new product MOST CASES, A BLACK & DECKER R E P R E S E N TATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU H AVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS V I TAL TO BLACK & DECKER. SAVE THIS MANUAL FOR FUTURE REFERENCE. Cat. # LP001B Form # 90529709 November 2007 Copyright © 2007 Black & Decker Printed in China GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS WARNING: TO RE

Your power pack was sent from the factory in an uncharged condition. Before attempting touse it, it must be charged for at least 3 hours. 2. DO NOT charge power pack in an temperature below 40°F or above 105°F. This is important and will prevent serious damage to the power pack. Longest life and best performance can be obtained if the power pack is charged when the air temperature is about 75°F. 3. While charging, the charger may hum and become warm to touch. This is a normal condition and does

Model Number: Model Description: *Product you purchased may vary from picture shown* CAUTION: Read and follow all Safety Rules and Operating Instructions of this product. Retain this document for future reference. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA • DO NOT stand on this product. You may fall which may cause personal injury. • WEAR SAFETY GLASSES AND GLOVES when cutting the banding material. The bands may snap which may cause personal injury. • WEAR SAFETY GLASSES when removin

769-00088.fm (2/2002) Operator’s Manual IMPORTANT: Read safety rules and instructions carefully before operating equipment. TROY-BILT LLC. P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forestcovered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it sh

13. Keep your work area clean. Immediately remove split wood around the machine so you do not stumble over it. 14. Never move this machine while the engine is running. 15. This machine should not be towed on any street, highway or public road without checking the existing federal, state, or local vehicle requirements. Any licensing or modifications such as taillights, etc., needed to comply, is the sole responsibility of the purchaser. If a “Statement of Origin” is required in your state, see yo

f. Always wear eye protection. g. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. h. Do not attach the hose or tool to your body. Attach the hose to the structure to reduce the risk of loss of balance if the hose shifts. i. Always assume that the tool contains fasteners. Do not point the tool toward yourself or anyone whether it contains fasteners or not. j. Do not nail on top of another nail. This is able to cause the

whereUn:1identifies the number of the units which values are displayed. In case of unit in alarm condition, all shared Terminals automatically display the alarms value of the unit. WARNING! The LAN network configuration will imply the loss of all units parameters if different from the "Default" ones, as indicated in chapter "Set list". Check "MP2000 set list" attached to the wiring diagram, where all "Default" parametres and the modify parameters are indicated. The parametres to be set are conta

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. Table of Contents System Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .