Log:
Téléchargements : 48   Taille : 704 kb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

1 FIG. 3 -2 BM 2609140574 08-08 9/3/08 8:40 AM Page 3 !WARNING Safety Rules for Multi-Detector Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE THESE INSTRUCTIONS The multi-detector’s ability to detect objects is affected by the proximity of other equipment that produce strong magnetic or electromagnetic fields, and by moisture, metallic building materials, foil-laminated insulation materials and/or conductive w

Téléchargements : 5   Taille : 294 kb   Fabricant : Bosch  
Catégorie : Autres outils
@name

Retain instructions for future reference. 2. Heed Warnings - Adhere to all warnings on the unit and in the operating instructions. 3. Attachments - Attachments not recommended by the product manufacturer should not be used, as they may cause hazards. 4. Installation Cautions - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only manufacturer-recommended accessories, or those sold

Téléchargements : 4   Taille : 1 mb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

The term “tool” in all of the warnings listed below refers to your mains-operated (corded) tool or battery-operated (cordless) tool. !WARNING The following labels are on your laser tool for your convenience and safety. They indicate where the laser light is emitted by the tool. ALWAYS BE AWARE of their location when using the tool. Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself. This tool produces laser class 2 laser radiation and complies with 2

Téléchargements : 12   Taille : 2 mb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

Do not stare into the beam. Class 2 Laser product. Radiacion laser. No mire al rayo. Producto laser de Clase 2. Rayonnement laser. Ne regardez pas directement dans le faisceau. Produit laser de Classe 2. IEC 60825-1:2007-03 <1mW, 635 nm Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, 7/26/2001 2 OPENOPENOPEN 1 1 2 3 4 5 6 7 9 10 11 8 13 2 605 438 682 12 1 618 C01 066 D CBAOR FEFE -3 14142 607 990 0310 601 015 B10160 601 069 110GH0 601 015 A10171518 6cm

Téléchargements : 16   Taille : 4 mb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

By referring to these tables, you can discover the recommended speeds for each type of accessory. Look these tables over and become familiar with them. Ultimately, the best way to determine the correct speed for work on any material is to practice for a few minutes on a piece of scrap, even after referring to the chart. You can quickly learn that a slower or faster speed is more effective just by observing what happens as you make a pass or two at different speeds. When working with plastic, for

Téléchargements : 3   Taille : 588 kb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

Such preventive safety measures reduce the risk of starting the tool accidentally. FORWARD/REVERSING LEVER & TRIGGER LOCK -7- VENTILATION OPENINGS BATTERY PACK AUXILIARY HANDLE DUST SHIELD LOCKING SLEEVE DRILL/HAMMER DRILL SELECTION DIAL BUTTON DEPTH GAUGE VARIABLE SPEED TRIGGER SWITCH NOTE: For tool specifications refer to the nameplate on your tool. FIG. 1 BATTERY CHARGED CONDITION INDICATOR WING KNOB Model Number 11225VSR 11225VSRH Shank style SDS SDS Charge time 15 min. 22 min. 26 min. Batte

Téléchargements : 5   Taille : 6 mb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

The "cost" to maintain sharp and undamaged accessories is more than offset by the "time saved" in operating the tool with sharp accessories. REMOVING SDS-plus® ACCESSORIES !WARNING Accessories may be hot after use. Avoid contact with skin and use proper protective gloves or cloth to remove. To remove an accessory, pull locking sleeve backward and pull bit forward. All accessories should be wiped clean after removing (Fig. 3). FIG. 2 FIG. 3 DUST SHIELD LOCKING SLEEVE SDS-plus® CHUCK Disconnect ba

Téléchargements : 8   Taille : 33 kb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

1. Suivez toutes les consignes de fonctionnement et de securite fixees au chargeur. 2. Utilisez uniquement les blocs-piles Bosch numero de catalogue BAT043 12V, BAT045 12V, BAT040 14.4V, BAT025 18V, BAT026 18V, BAT030 24V et BAT031 24V. 3. Ne lavez pas le lampe torche a l'eau et ne le gardez pas a un endroit humide. Si le lampe torchele se mouille, sechez-le des que possible. 4. Le lampe torche a une construction robuste. Il doit, toutefois, etre manie avec soin. Ne demontez pas la tete et ne fo

Téléchargements : 1   Taille : 33 kb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

1. Rotate lens cap D counter clockwise and carefully remove lens cap D. 2. Remove bulb E from spring. 3. Reinstall replacement bulb E in spring. 4. Reinstall lens cap D and rotate clockwise to tighten. Note: One replacement bulb is provided, located inside head of the unit. WARNING! Do not position the lighted Flashlight head on or near flammable or combustible materials. The bulb gets hot during use. WARNING! Do not splash the lighted Flashlight bulb with liquids. Hot bulb may shatter when cool

Téléchargements : 11   Taille : 33 kb   Fabricant : Bosch  
Catégorie : Autres outils
@name@name@name

To insert battery A, align battery and slide battery pack into tool until it locks into position. Do not force. Operation 1. To turn the Flashlight "ON", squeeze and release trigger switch C. To turn Flashlight "OFF", squeeze and release trigger switch C. 2. Your Flashlight has a swivel head that can be rotated to desired position. To change the position of the head, rotate counterclockwise until it stops. To return head to it’s original position, rotate the head clockwise until it stops. Replac





catégories