Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
After a few moments you will see a blue screen. To setup Windows NT now, press Enter and continue with Step 3 below. Boot CD-ROM installation: When the following message appears onscreen, press the F6 key and skip to Step 4 below. Setup is inspecting your computer’s hardware… 3 Press S to skip auto-detection of your AAA-130 Series array adapter. 4 Press S again to specify an additional device. 5 Press Enter to select Others; insert the Adaptec Array1000 Family Manager Set drivers diskette in your floppy drive. 6 The screen displays the adapter drivers supported on the diskette. Select the Adaptec Array1000 Family Adapter and press Enter. 7 If you want to add drivers for other host adapters (other than the AAA-130 Series), do so at this time by pressing S and repeating Step 5 for each additional adapter and inserting the appropriate disk provided by the hardware manufacturer. 8 Press Enter to continue with the Windows NT operating system setup. Follow the onscreen instructions and in the Windows NT documentation to complete the installation. I n st al ling t h e Dr iv er Whe n Wi n d o w s NT is Al re a d y I n st al le d To update or install the cda1000.sys driver if Windows NT is already installed, follow the instructions below for the version of Windows NT that is already installed. Wi n d o ws N T 3 . 51 To install the cda1000.sys driver when Windows NT 3.51 is already installed, follow these steps: 1 Start the Windows NT Setup program. (Its icon is usually found in the Main program group.) There is a brief pause while Windows NT Setup scans your hardware configuration. AAA-130 Series Installation and Hardware Guide Stock Number: 511198-00, Rev. A Page: 4-4 Print Spec Number: 495456-00 Current Date: 3/3/99 ECN Date: 4/29/97 File Location: Q:\Rosemarie\511198-00\CH04.FM Last Modified: March 3, 1999 10:41 am Installing Software on a Windows NT System 2 Select the Options menu and then select Add/Remove SCSI Adapters. The SCSI Adapter Setup program displays a list of all host adapters currently installed. 3 Click Add to add another host adapter type to the list. A list of additional SCSI adapters appears. 4 Expand the list of additional SCSI adapters. Select Other, and press Enter. 5 Insert the Adaptec Array1000 Family Manager Set drivers diskette into drive A. Enter the following path to the installation files and then click OK: a:\winnt 6 The screen displays the adapter drivers supported on the diskette. The Adaptec Array1000 Family Adapter driver is highlighted by default; click OK. The driver is added to the list of SCSI adapters. 7 Select Adaptec Array1000 Family Adapter from the list of SCSI adapters, and click Install. At this point, Windows NT Setup checks if the specified...
Ce manuel est également adapté pour les modèles :Autres composants - AAA-131 (482.9 kb)