Évaluations - , GPA:
(
)
)
Fabricant : Genie
Taille : 424.71 kb
Nom Fichier : 33547.pdf
Langue d'enseignement: 
Le document est chargé, s'il vous plaît patienter
 |
Le document est chargé, s'il vous plaît patienter
Facilité d'utilisation
Use the appropriate inspection to verify that all decals are legible and in place. Part No. Description Quantity 31072 Label - Operator's Manual Container 1 32687 Warning - Standard Forks Safety/Setup 1 32714 Warning - Adjustable Forks Safety/Setup 1 32716 Notice - Boom Setup 1 32717 Warning -Boom Safety 1 32770 Notice - Two-Speed Shift Instructions 1 32775 Warning - Fall Hazard, Load Platform 1 32885 Warning - Silent Winch 1 32938 Label - Use This Winch 1 32939 Warning - Brake Lock 1 33468 Warning - No Riders 1 33545 Warning - Machine Safety & Setup (before serial number 9596-5288) 1 Part No. Description Quantity 40513 Warning - Machine Safety & Setup (after serial number 9596-5287) 1 52675 Caution - Damaged Machine Hazard 1 52984 Cosmetic - Superlift Contractor Logo 2 52992 Cosmetic - SLC-6 2 52993 Cosmetic - SLC-12 2 52994 Cosmetic - SLC-18 2 52995 Cosmetic - SLC-24 2 97529 Caution - Bodily Injury Hazard 1 97547 Danger - Electrocution Hazard 2 Genie Superlift Contractor PartNo.33547 Part No. 33547 Genie Superlift Contractor 19 First Edition • Ninth Printing Operator's Manual DECALS Shading indicates decal is on the other side of the machine. 32938 Serial Plate Serial Plate 52984 52984 33468 32687 40513 or 33454 32939 32885 32770 31072 52675 32717 32716 32714 33468 32775 33468 33468 52992 or 52993 or 52995 52994 or 52992 or 52993 or 52995 or 52994 97547 97529 40513 or 97529 33454 32938 32885 32770 32939 Australia models only Operator's Manual First Edition • Ninth Printing DECALS Inspection for Decals with Symbols Determine whether the decals on your machine have words or symbols. Use the appropriate inspection to verify that all decals are legible and in place. Part No. 52984 52992 52993 52994 52995 82487 82964 Description Quantity Cosmetic - Superlift Contractor Logo 2 Cosmetic - SLC-6 2 Cosmetic - SLC-12 2 Cosmetic - SLC-18 2 Cosmetic - SLC-24 2 Label - Read The Manual 1 Warning - No Riders 1 Part No. 97532 97539 97541 97543 97545 97546 Description Caution - Bodily Injury Hazard Danger - Electrocution Label - Use This Winch Warning - Load Center Chart Warning - Lock Brake Notice - Two-Speed Shift Quantity 1 2 1 1 1 1 Genie Superlift Contractor PartNo.33547 Part No. 33547 Genie Superlift Contractor 21 First Edition • Ninth Printing Operator's Manual Shading indicates decal is on the other side of the machine. DECALS Operator's Manual First Edition • Ninth Printing Transport and Lifting Instructions Observe and Obey: The transport vehicle must be parked on a level surface. The transport vehicle must be secured to prevent rolling while the machine is being loaded. Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the machine weight. See the serial plate for machine weight. The machine must be secured to the transport vehicle with chains or straps of ample load capacity. Loading the Machine Be sure to remove the load handling attachment from the machine and place the stabilizers in the stored position. 1 Fully lower the carriage, to lock for transport. 2 Rotate the carriage hold-down bar over the carriage. 3 Raise the carriage until it contacts the carriage hold-down bar. 4 Adjust the loading wheels to the desired position. Be sure the pin is properly inserted. 5 Lock the rear base casters. 6 Place the machine against the vehicle. Use proper lifting techniques to load the machine into the transport vehicle. Be sure to check that the carriage is locked in the lowered position. 7 Use a minimum of 1 chain or strap to secure the machine to the truckbed. Place the chain or strap over the mast. Placing the chain or strap over the legs can damage the legs. 8 To unload, follow the loading instructions in reverse order. Loading Machine with a Crane Be sure to place the legs and stabilizers in the stored position. Be sure to inspect the machine and remove any loose or unsecured items. Use the lifting bracket on the top of the rear mast column. Always place the lifting hook through the lifting bracket so that it points away from the machine. Genie Superlift Contractor PartNo.33547 First Edition • Ninth Printing Operator's Manual Specifications Model SLC-6 SLC-12 SLC-18 SLC-24 Height-Stowed 86 in 86 in 86 in 86 in 2.2 m 2.2 m 2.2 m 2.2 m Width 311/2 in 311/2 in 311/2 in 311/2 in 80 cm 80 cm 80 cm 80 cm Width-stabilizers lowered (if equipped) 66 in 66 in 66 in 66 in 1.7 m 1.7 m 1.7 m 1.7 m Length-Stowed 34 in 34 in 34 in 34 in 86.4 cm 86.4 cm 86.4 cm 86.4 cm Length-Operating 59 in 63 in 73 in 81 in 1.5 m 1.6 m 1.8 m 2 m Ground 2 in 2 in 2 in 2 in Clearance 50.8 mm 50.8 mm 50.8 mm 50.8 mm Load Capacity 650 lbs 650 lbs 650 lbs 650 lbs at 14 inch / 36 cm load center 295 kg 295 kg 295 kg 295 kg Note: see Load Capacity Charts section for load capacities at other load centers. Net Weight 166 lbs 204 lbs 307 lbs 374 lbs 75 kg 93 kg 139 kg 170 kg Airborne Noise Emissions by Machinery 85 dB 85 dB 85 dB 85 dB Maximum sound level at normal operating workstations (A-weighted) Load Hand...