Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 6.15 mb Nom Fichier : Langue d'enseignement:

1 Set the time of the tanning session by pushing the + button to put the time forward or by pushing the - button to put the time backward (fig. 17). Keep the button pressed in to adjust the time more quickly. 2 Lie down directly under the lamp units of the appliance to ensure that the sides of your body are also tanned properly. 3 Put on the protective goggles provided. 4 Switch on the tanning lamps by pressing the start button .(fig. 18). B Note: During start-up the tanning lamps may produce a humming sound. This sound will stop as soon as the lamps are burning properly. B Note: The tanning lamps will start to emit a visibly stronger light after about 60 seconds, which means they are now burning at full power. From this moment onwards you can switch the facial tanner on or off. B Note: If the lamps fail to go on after about 20 seconds, switch the appliance off (.), let the lamps cool down for 3 minutes, set the tanning time and switch the appliance back on again (.). . A blinking signal will appear; the set time is shown on the display (25 minutes in this case) (fig. 19). The countdown of the set tanning time will now star t. . You can switch the facial tanner (•, .) on or off during the session without having to switch off the whole appliance (fig. 20). B (This also holds for the extra face tan in combination with .). The chosen symbols stay visible in the display, but the other symbols do not. . During the last minute of the session you will hear an intermittent beeping sound (fig. 21). . During this minute, you can press the pause/repeat button §to repeat the set time (fig. 22). . The display shows the set time and starts to count down.The beeping stops. . It is also possible to set a new time. By doing this, you can avoid the 3-minute waiting time which is necessar y to allow the tanning lamps to cool down after they have been switched off. 5 Set a new time by pushing the .or .buttons.Then push the start button .(fig. 23). The beeping stops and the time that has just been set star ts counting down. . When you do not repeat the session by pressing §or set a new time during the last minute of the session, the countdown continues and the appliance will automatically switch off as soon as the set time has passed. Interrupting the tanning session 1 Interrupt the tanning session by pushing the pause/repeat §button (fig. 24). The lamps will be switched off, P appears in the display together with the remaining time. For 3 minutes the remaining time will blink. During this time the lamps cool down. When the blinking has stopped, you can switch the appliance back on again by pushing the .button.The remaining time will now be counted down. Changing the tanning time during a session 1 When you are tanning, you can change the set time by pushing the .button.The lamps will be switched off.Then set a new time by pushing the ..buttons.Wait until the set time has stopped blinking (this will take 3 minutes because the lamps have to cool down first) and push the .button again. ENGLISH After the tanning session 1 Keep track of the number of sessions you have had by means of the memory knobs (types HB953 and HB952 only).The appliance has two memory knobs: one per person (fig. 25). Cooling The appliance is cooled by means of fans to prevent materials and par ts from becoming too hot.The tanning lamps won't go on if they are too hot (see for instance "Interrupting the tanning session"). . After you have switched off the tanning lamps, the fans will continue to work for three more minutes. This is convenient, because it enables you to use the tanning lamps again only 3 minutes after switching them off. B If you have switched the tanning appliance off by removing the plug from the wall socket, the fans won't provide cooling for three more minutes, of course. B If you have switched the tanning appliance off by removing the plug from the wall socket and another person wishes to use the appliance for a tanning session right away, the newly set time won't blink on the display. This means that the next person will have to keep track of the three-minute cooling-down period himself. Cleaning 1 Always unplug the appliance and let it cool down before you start cleaning it. 2 Clean the outside of the appliance with a damp cloth. Do not let any water run into the appliance. 3 Do not use scouring pads. Never use abrasive liquids like scouring agents, petrol or acetone to clean the appliance. . You can clean the outside of the UV filters with a soft cloth sprinkled with some methylated spirits. Storage 1 Let the appliance cool down for 15 minutes before you put it in transport position and store it. . In the meantime, you can wind up the cords and put them in the base of the appliance. 2 Make sure the cords and remote control unit are stored properly, as they might otherwise get stuck between parts of the appliance when you put the appliance in transport position (fig. 26). 3 Firmly hold the upper part of the stand with one hand and loosen...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :