Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
During the last 40 seconds, you hear the selected sound gradually increase tothe selected level. 2 Press the QUICK CHECK button again to stop the test (Fig. 15). The light ring round the QUICK CHECK button goes out. Note:The appliance continues to run the accelerated wake-up alarm test until you press the QUICK CHECK button. switching the alarm on or off The light ring round the ALARM button burns when the alarm is on. At the set time, the wake-up sound is played and the lamp has reached the selected light intensity level. 1 , Press the 3button to switch off the light and the wake-up sound. (Fig. 17) The light ring round the ALARM button continues to burn.The alarm function is still activeand the wake-up alarm will go off at the set time and with the set sound and light intensitythe next day (Fig. 11). 2 Press the #button if you want to switch off the sound when the alarm goes off. (Fig. 18) Press the @&button if you want to switch off the lamp when the alarm goes off. (Fig. 19) If you want to switch off the alarm function altogether, press the ALARM button one or more times until there is no sound symbol on the display and the light ring round the ALARM button goes out. snoozing 1 Press the SNOOZE/SCREEN BRIGHTNESS CONTROL button to switch off the sound for 9 minutes when the alarm has gone off (Fig. 20). The lamp continues to burn at the selected intensity level. After 9 minutes, the wake-up sound is automatically played again. 2 Press the SNOOZE/SCREEN BRIGHTNESS CONTROL button longer to dim the light. Note:You can only do this once. After you release the button, it functions as SCREEN BRIGHTNESS CONTROL button again. Note:You can only use the snooze function within 15 minutes after the alarm starts to go off. After those 15 minutes, the button no longer functions as SNOOZE button and only functions as SCREEN BRIGHTNESS CONTROL button. adjusting the light intensity during the wake-up phase 1 Turn the light adjustment wheel @to select a higher or lower light intensity. (Fig. 14) The lamp burns at the selected intensity during the rest of the wake-up phase. adjusting the brightness of the display 1 Press the SNOOZE/SCREEN BRIGHTNESS CONTROL button to adjust the brightness ofthe display (Fig. 20). EnglisH 11 Press the button again to set the brightness to another level.There are three levels. Note:This button cannot be used to adjust the display brightness when the alarm goes off and during snoozing. 3button 1 When the alarm goes off at the set wake-up time, press the 3button to switch off the wake-up alarm light and sound. Note:The alarm function remains active and the light ring round the alarm button continues to burn. 2 When you have switched on the reading lamp and/or the radio, press the 3button to switch off the reading lamp and/or the radio. When you press the 3button again, only the light goes on. Note:When the alarm function is active, pressing the 3 button does not affect the alarm settings. reading lamp 1 2 Press the @&button to switch the lamp on or off. (Fig. 19) Turn the light adjustment wheel @upwards or downwards to increase or decrease the light intensity level. (Fig. 14) The light level indication on the display @shows the light intensity level (00 to 20). (Fig. 21) , Tip:We advise you to set the light intensity to 0 (maximum level) for reading. If this light level is not strong enough, switch on an extra lamp. Do not forget to set the light intensity level back to the wake-up level! radio (HF3462/HF3461 only) 1 Press the RADIO button to switch on the radio (Fig. 22). The light ring round the button goes on (Fig. 23). ,2 Use the %and the ^buttons to select the frequency of your favourite station. (Fig. 24) You can choose FM stations. You can use the external antenna for better reception. Insert the external antenna into theantenna socket next to symbol oon the back of the appliance. Press the RADIO button to switch off the radio (Fig. 22). Power failure To make sure the alarm goes off at the set time after a shor t power failure, the appliance has been provided with a backup system.This system has a self-charging batter y that does not have to be replaced.The system remembers the time for a few minutes. After a long power failure, the display shows an incorrect clock time and the alarm time is , 00.00. Set the correct clock time (see chapter ‘Preparing for use’) and the correct alarm time (see chapter ‘Using the appliance’) (Fig. 5). reset 1 If the appliance does not respond well, remove the plug from the wall socket and thenreinsert it. If this does not help, press the reset button on the bottom of the appliance toreset the display to the factory default settings (Fig. 25). Cleaning and maintenance Always unplug the appliance and let it cool down for approx. 15 minutes before you startcleaning it. 12 EnglisH Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the appliance. Regularly remove dust from the inside of the appliance with ...
Ce manuel est également adapté pour les modèles :Autres appareils personnels - HF3451/01 (1.21 mb)