Log:
Évaluations - 2, GPA: 4 ( )

Instructions BOXLIGHT, Modèle CD-450m

Fabricant : BOXLIGHT
Taille : 946.96 kb
Nom Fichier : 3a59007a-23a6-40fc-9aec-ad648de9ba6e.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


If that doesn’t clear up the image, turn Auto Image off and adjust the sync (page 28) and/or the tracking (page 29) manually. 5 If the colors don’t look right, adjust the brightness (page 25). Using the Remote Control Point the remote control at the projection screen or at the front or rear of the projector. The range for optimum operation is about 40 feet. If you point the remote at the projection screen, the distance to the screen and back to the projector must be less than or equal to 40 feet. For best results, point the remote directly at the projector. The projector ships with a remote that has four function buttons, a disk mouse and two mouse buttons, one on the top of the remote and one on the bottom. NOTE: If you can’t aim the remote control at the projector so that its signal is received — for example, when using rear projection —purchase the optional LaserPro remote and connect it directly to the projector with the optional remote control cable. See “Optional Accessories” on page 46. Using the Projector disk mouse right mouse button left mouse button (on underside of remote) NOTE:To control the computer’s mouse from the projector’s remote or keypad, you must connect the mouse cable to the CablePro. See page 10 for details. FIGURE 13 Remote control Press anywhere on the edge of the disk mouse to move the cursor on the screen. You can move the cursor at any angle by pressing the corresponding edge of the disk. The mouse button on the top of the remote simulates your computer’s right mouse button; the button on the bottom simulates your computer’s left mouse button. See “Using the Keypad and Remote Buttons” starting on page 22 for a description of the four function buttons. If you are creating presentations in Microsoft® PowerPoint®, you can use the remote’s mouse buttons to navigate through your presentation while in Slide Show mode. To configure PowerPoint for this, choose Options from the Tools menu, click the View Tab, de-select the “Popup Menu on Right Mouse Click” option in the Slide Show section, then click OK. Then, when you’re in PowerPoint’s Slide Show mode, a left click advances to the next slide and a right click returns to the previous slide (other PowerPoint modes are not affected). Adjusting the Projector To focus the image, rotate the focus ring (Figure 14) until the image is clear. To zoom the image, rotate the zoom ring. This adjusts the image size without affecting focus. elevator button focus ring zoom ring FIGURE 14 Focus ring, zoom ring, and elevator button The projector is equipped with a self-locking, quick-release elevator foot and button (Figure 14). To raise the projector: 1 Press and hold the elevator button (Figure 15). 2 Raise the projector to the height you want, then release the button to lock the elevator foot into position. FIGURE 15 Adjusting the height of the projector Using the Projector Using the Keypad and Remote Buttons The keypad is lit orange when the projector is on and lit green while the menus are displayed. While the menus are displayed, the volume, source, and standby buttons act as navigation buttons. See “Using the On-Screen Menus” on page 24 for details. left/right mouse buttons power LED FIGURE 16 Keypad Menu Press menu to open the on-screen menus (the keypad lights green). Press menu again to close the menus. When you close the menus, the projector saves any changes you made. For more information about the on-screen menus, see page 24. Mouse buttons Use the left and right mouse buttons to make selections and adjustments in the menus. See “Using the On-Screen Menus” on page 24 for details. Source (keypad only) or Computer and Video (remote only) When you have more than one source (computer and video) connected to the projector, select between them by pressing the source button on the keypad or the Computer or Video button on the remote. Standby When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes. You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 30 for details. • If you press standby again within 15 minutes, the projector returns to normal operations immediately. • If you press standby again after 15 minutes, there is about a 30 second delay before the lamp turns back on. • If you don’t press standby again, the lamp turns off after 15 minutes. Volume (keypad only) • To increase the volume, press • To decrease the volume, press Volume adjustments are saved for each source you have connected. Using the Projector NOTE:Some menu items may be grayed out at certain times. This indicates the item is not applicable to your setup (for example, video standards do not apply to computer sources) or the item is not enabled until another selection is made (for example, Manual Tracking is not available until Auto Image is turned off). Using the On-Screen Menus The projector has six drop-down menus that allow you to make image adjustments and change a variety of setting...

Ce manuel est également adapté pour les modèles :
Projecteurs - CD-550m (946.96 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories