Évaluations - 1, GPA: 3 ( )

Fabricant : Acer Taille : 4.71 mb Nom Fichier : Langue d'enseignement:

7 POWER Refer to the "Turning the Projector On/Off" section. 8 ASPECT RATIO To choose the desired aspect ratio (Auto/4:3/16:9). Auto/Full/4:3/16:9/L.Box (P5370W) 9 ZOOM Zooms the projector display in or out. 10 Laser button Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. This function is not supported in Japanese market. 11 Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower Management. 12 KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). 1 7 13 2 28 10 27 5 6 3 4 8 31 9 30 29 14 15 17 19 21 23 25 16 18 24 26 20 22 11 12 (P5260i Series) 7 # Icon Function Description 12 Four directional select keys Use up, down, left, right buttons to select items or make adjustments to your selection. 13 MENU • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. 14 PAGE For computer mode only. Use this button to select the next or previous page. This function is only available when connected to a computer via a USB cable. 15 RGB Press "RGB" for true-color optimization. 16 BRIGHTNESS Press "BRIGHTNESS" to adjust the brightness of the image. 17 CONTRAST Use the "CONTRAST" option to control the difference between the lightest and darkest parts of the picture. 18 COLOR Press "COLOR" to adjust the color temperature of image. 19 VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. 20 COMPONENT Press "COMPONENT" to change source to Component video. This connection supports YPbPr (480p/576p/720p/1080i) and YCbCr (480i/576i). 21 S-VIDEO To change source to S-Video. 22 VIDEO To change source to COMPOSITE VIDEO. 23 DVI Press "DVI" to change source to DVI. This connection supports digital RGB, analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr (480i/576i) and HDCP signals. 24 HDMI™ To change source to HDMI™. (for the model if with HDMI™ connector) 25 MUTE To turn on/off the volume. 26 WIRELESS Press "WIRELESS" to display the image which is wirelessly transmitted from the PC to the projector via the "Acer eProjection Management" utility. (for wireless model) 27 KeyPad 0~9 Press "0~9" to input a password in the "Security settings". 28(*) MOUSE Left/ Right Click Left-/right-click buttons are on the left and right, respectively; the center button works as a multidirectional pointer stick. To enable this function, an USB cable must be connected to projector from your PC. 29(*) VOLUME Increases/decreases the volume. 30(*) LOCATION Choose the menu location on the display screen. 31(#) PIP Press "PIP" to see two screens at the same time. The main screen projection signal uses VGA input by default while the smaller PIP display uses a secondary video source. English Note: "*" Only for P5260i series. "#" PIP function is not supported in P5260i. 8 Note: English 9 Getting Started Connecting the Projector DVD player, Set-top Box HDTV receiver VGA, DVI S-Video Output RS232 DVD playerVideo Output DVI-D DVI-D Y Y RB G RB G HDTV adapter D-Sub D-Sub R W RS232 D-Sub D-Sub HDMI HDMI USB USB D-Sub D-Sub 1 2 3 4 5 6 7 8 9 # Description # Description 1 Power cord 6 S-Video cable 2 VGA cable 7 Audio cable jack/jack 3 Composite video cable 8 DVI cable 4 USB cable 9 HDMI cable (P5260i/P5270/P5280/ P5370W series) 5 VGA to component/HDTV adapter Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. English 10 Connecting the Projector for Wireless Function English SpeakerInternetPowerWLAN1234 # Description 1 Power cord 2 Audio cable jack 3 Lan cable 4 Antenna Note: For P5260i only 11 English Turning the Projector On/Off Turning on the Projector 1 Slide on the lens door. 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen displays "No Signal", please make sure the signal cables are securely connected. • If you connect to multiple sources at the same time, use the "Source" button on either control panel or the remote control or direct source key on the remote control to switch between inputs. POWER 1 E nglish English 12 Turning off the Projector 1 To turn off the projector, press the "Power" button twice. The message below will display onscreen for 5 seconds. "Please press power button again to complete the shutdown process." 2 Immediately after powering off, the Power indicator LED will fla...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :