Évaluations - 4, GPA: 4
(
)
)
|
Facilité d'utilisation
..Facing to the screen Make sure the remote control emitter is facing to the screen when pressing the buttons to operate the projector. The signal will be reflected off the screen to the projector. ..The operating range may differ due to the screen material, and this function may not be effective with a translucent screen. If you need to readjust the projected image position while projecting or when AUTO SETUP in OPTION menu is set to BUTTON, press the AUTO SETUP button. The projector will detect a RGB signal by SIGNAL SEARCH system and adjust the setting of POSITION, DOT CLOCK and CLOCK PHASE in POSITION menu automatically. NOTE: • See “About Your Projector” on page 12 to confirm the position of the remote control signal emitter and receptor. • Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as fluorescent. • If there are any obstacles between the remote control emitter and the remote control signal receptor, the remote control may not operate correctly. Setting up the image position automatically Screen Projected image NOTE: • If SIGNAL SEARCH setting in OPTION menu is set to OFF, select the required signal manually first. See “Switching the input signal” on page 24. • If the dot clock frequency is 108 MHz or higher, AUTO SETUP is not effective. • If the projected image is too dark or blurred around the edge, AUTO SETUP may stop the processing before complete the adjustment and return to the previous setting. Project a much clearer or lighter image and try again. ENGLISH - 23 Remote control operation Switching the input signal You can switch the input method manually by • Pressing the WIRELESS button pressing the COMPUTER, WIRELESS and • See CD-ROM contents for more detailed information VIDEO buttons. Press the required button for the WIRELESS button. several times or IH to cycle through the • Pressing the VIDEO button input methods as follows. ..You can confirm the selected input method in displayed graphical input guide on the upper right VIDEO of the screen. Highlighted in yellow is selected terminal. See “INPUT GUIDE” on page 35. • Pressing the INPUT SELECT button on S-VIDEOCOMPUTER2 the projector • Pressing the COMPUTER button COMPUTER1 COMPUTER2 COMPUTER1 NOTE: • Only when the COMPUTER2 SELECT is set to INPUT, you can switch between COMPUTER1 and COMPUTER2. • With no signals from COMPUTER terminals, the computer connecting guidance will be displayed. See “Computer connection guidance” on page 49. WIRELESS S-VIDEO VIDEO Basic Operation NOTE: • Switched signal may be displayed after a short interval. • If you select an unplugged input method, the input guidance will blink on and off several times. • See “List of compatible signals” on page 47. • See “Connections” on page 17. Capturing an image Press the FREEZE button to capture the image projector will stop. Press the FREEZE button again to and you can see it as a still picture. While the escape and return to the continuing image. image is frozen, the audio sound through the Stopping the projection temporary You can stop the projection and audio sound electrical power. Press the AV MUTE button again to through the projector temporarily for saving escape. Resetting to the factory default settings You can reset most of the customized settings to the factory defaults by pressing the DEFAULT button of the remote control. Display the required sub menu or the menu items and press the DEFAULT button again. • See “Main menu and Sub-menu” on page 28. NOTE: • Some menu items are not available to reset by pressing the DEFAULT button. Adjust each menu items manually. • To reset all the settings to the factory defaults, see “INITIALIZE ALL” on page 38. ENGLISH - 24 Remote control operation Projecting an image in INDEX-WINDOW mode You can project an image split in 2 windows as an INDEX-WINDOW. One is frozen and stored in memory, and displayed on the screen’s left side while displaying subsequent image continues on the right. Press the MENU or RETURN button to escape. Projected image Frozen image Continuing image • Switching the position In default, the frozen image is displayed on the left and the subsequent image is displayed on the right. Press IHto switch the position. Frozen image Continuing image Continuing image Frozen image • Changing the image size Press FG to capture a new image and change the size in 2 ways. Frozen image Continuing image NOTE: • If you change the window size, the aspect ratio of the image is changed and becomes vertically elongated. • Capturing a new image While in INDEX-WINDOW mode, press the ENTER button to capture a new image and the frozen image window will be updated in a moment. Basic You can assign a selected function to the FUNCTION button. Following functions are assignable. See “FUNCTION BUTTON” on page 37 for assigning procedure. NOTE: • When capturing a quick moving picture, perform several times to get a stabled picture. Using an assigned function AV MUTE See ...