Évaluations - 3, GPA: 3.3
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Move av<> / select O' / a v<> / O'; Use to move to or select an item within a menu. Volume ^ button v?_viL : Use to adjust the volume. 3. MENU button Use to display the Menu Screen. 4. SOURCE button Use to select the external device signal. 5. t!) Button Use to turn the projector on or off. 6. Lens Use for Focus Adjustment. 7. Remote Control Signal Receiver - 8. Zoom Knob Use to enlarge or reduce image size. 9. Focus Ring Use for Focus Adjustment. 10. Lens cover - 3-2 Using 3-3 Remote Control 1. POWER () Button Use this button for turning the product on and off. 2. AUTO Button Adjusts the Picture automatically. (Available in < PC> Mode Only) 3. MENU (01]) Button Used to display the Menu Screen. 4. Move )/(Ci) Buttons Used to display the Menu Screen. 5. V. KEYSTONE Button (+“) Use this when the screen is displayed in a trapezoid shape. 6. INSTALL Button Used to flip or reverse the projected image. 7. BLANK Button This is used to turn off the screen and sound temporarily. The video and audio will come back on when any button other than the [POWER] button is pressed. 8. P.SIZE Button Used to adjust the size of picture screen. 9. QUICK Button This is used to quickly return to the last menu used. 10. MUTE (■*) Button Press to mute the sound temporarily. Press the MUTE button again or the VOL button (■’'"•') when the sound is muted to hear sound again. 11. RETURN (lO) Button Returns to the previous menu. 12. EXIT ( "1) Button Used to make the Menu Screen disappear. 13. VOL (-''-'-') Button Used to control the volume. 14. INFO Button Used to check source signals, picture setup, PC screen adjustment and lamp lifespan. 15. SOURCE Button Used to check or select the connection status of external devices. 16. P.MODE Button Used to select Picture Mode. 17. STILL Button Used to see still images. 0 Make sure to place your remote control on a table or desk. If you step on the remote control, you may fall and hurt yourself or damage the remote. 0 You can use the remote control up to a distance of about 23 feet (7 m) from the product. Using 3-3 3-4 LED Indications LED Indications • : Light is On ® : Light is Blinking o : Light is Off STAND BY LAMP TEMP STATUS • o o If you press the [POWER] button on the remote control or projector, the screen appears within 30 seconds. • • o The projector is operating normally. • CJ o The projector is preparing an operation after the [POWER] button on the projector or the remote control has been pressed. o CJ o The [POWER] button has been pressed to turn off the projector, and the cooling system is in operation to cool off the inside of the projector. (Operates for about 3 seconds.) c o c The cooling fan inside the projector is not operating normally. Refer to Action 1 in Clearing Indicator Problems below. o c c The lamp cover protecting the lamp unit is not closed properly. Refer to Action 2 in Clearing Indicator Problems below. • c c The lens cover has not opened completely. Refer to Action 3 in Clearing Indicator Problems below. • • CJ The projector has changed to Cooling mode because its internal temperature has increased beyond the maintenance limit. Refer to Action 4 in Clearing Indicator Problems below. o o c The projector has turned itself off automatically because its internal temperature has increased beyond the maintenance limit. Refer to Action 5 in Clearing Indicator Problems below. c c c A problem has occurred with the operation of the lamp. Refer to Action 6 below. • CJ • The lifetime of the lamp has expired. Refer to Action 7. CJ CJ • The power for the product is not operating normally. Contact a service center. 3-4 Using Clearing Indicator Problems CLASSIFICA TION STATE MEASURES Action 1 The cooling fan system is not operating normally. If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center. Action 2 The lamp cover protecting the lamp unit is not properly closed or the sensor system is not operating normally. Check if the screws on the side of the projector are securely tightened. If they are and the indicators are still lit, contact your product distributor or a service center. Action 3 The lens cover has not opened completely. Open the lens cover completely. If the lens cover does not open completely when the projector is operating, both the video and audio turn off automatically. If this status persists for ten minutes, the projector turns off automatically. Action 4 The projector has changed to Cooling mode because the internal temperature of the projector has increased beyond the maintenance limit. If the internal temperature of the projector has increased beyond the maintenance limit, the projector changes to Cooling mode before turning off automatically. In Cooling mode, the fan speed is increased and the projector's lamp is changed to
Projecteurs - SP-L301 (2.8 mb)
Projecteurs - SP-L331 (2.8 mb)