Évaluations - 2, GPA: 4.5
(
)
)
|
Photos et spécifications Samsung SP-M200S |
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Keep batteries out of the reach of children. • If swallowed, see a doctor immediately. Major Safety Precautions 1-3 /j\ Caution If the product generates a strange noise, a burning smell, or smoke, unplug the power plug immediately and contact a service center. • Failing to do so may result in electric shock or fire. If the power plug pin or jack is exposed to dust, water or alien substances, clean it thoroughly. • There is a danger of electric shock or fire. When cleaning the product, disconnect the power cord and clean the product with a soft dry cloth. • Avoid using chemicals such as wax, benzene, alcohol, thinner, mosquito-repellent, fragrance, lubrication or cleansing agent when cleaning the product. This may result in the exterior being deformed or the print being removed. When not using the product for a long time, such as leaving your home, unplug the power cord from the wall outlet. • Otherwise, it may cause dust accumulation and result in fire caused by overheating or a short circuit or result in an electric shock. If the product is installed in a location where the operating conditions vary considerably, a serious quality problem may occur due to the surrounding environment. In this case, install the product only after consulting our Call Center. • Places exposed to microscopic dust, chemicals, too high or low temperature, high humidity, such as airports or stations where the product is continuously used for a long time etc.. If you drop the product or the case is damaged, turn the power off and unplug the power cord. Contact a service center. • Failing to do so may result in fire or electric shock. Make sure to place your remote control on a table or desk. • If you step on the remote control, you may fall and hurt yourself or the product may be damaged. If water or a foreign substance enters the product, turn the product off, unplug the power cord from a wall outlet, and contact a Service Center. Do not use the product while it indicates a malfunction, such as no sound or no picture. • Turn the product off immediately, unplug the power cord from a wall outlet, and contact a Service Center. When a gas leak occurs, do not touch the product or the power plug and ventilate immediately. • A spark may result in an explosion or fire. • During a thunder or lighting storm, do not touch the power cord or antenna cable Do not touch the lens on the product. • This may cause damage to the lens. Do not touch any outer part of the product with tools such as a knife or a hammer. To clean dirt or stains on the front projection lens, use spray or a wet cloth dampened with neutral detergent and water. Ask a Service Center to clean the interior of the projector at least once per year. 1-3 Major Safety Precautions To avoid burning yourself, do not touch the vents or lamp cover while operating or right after turning off the product. Do not open any cover on the product. • This would prove hazardous because of high-voltage current inside the product. Be careful not to touch the ventilation hole while the projector is on as hot air comes out. Do not place objects vulnerable to heat near the projector. Take care not to lose the lens cover of the product. • The lens could get damaged. Do not clean the product using water spray or a wet cloth. Avoid using any chemicals such as detergents, industrial or automotive polish, abrasive, wax, benzene, alcohol on any plastic part of the product such as projector case, since this may cause damage. Do not use any undesignated battery. The ventilation hole is hot for some time though the projector is turned off. Keep you hands or body off the ventilation hole. Be careful to keep your body away from the projector lamp. The lamp is hot. (Children and those who have sensitive skin should be more careful.) The lens cover protects the lens and should be used when the projector is turned off. • T o hide the screen while the projector is turned on, use the BLANK feature. Major Safety Precautions 1-3 2 Installation and Connection 2-1 Package Contents E9 • Unpack the product and check if all of the contents listed below have been included. • Store the packaging box in case you need to move the product at a later date. Projector CONTENTS Quick Installation Guide Warranty Card / Registration User Manual Power Cord Card (Not available in all locations) Remote Control / 1 Battery Cleaning Cloth D-Sub Cable Lens cover ( Not available in all locations) 4 Screws Projector case (For bracket of ceiling mount.) S3 A ceiling mount is not included and must be purchased separately. Use the included screws to attach the projector to the ceiling mount bracket. 2-1 Installation and Connection 2-2 Installing the Projector S3 Install the projector so that the beam from the projector is perpendicular to the screen. • Place the projector so that the lens aims at the center of the screen. If the screen is not vertical, the picture on the screen may...
Ce manuel est également adapté pour les modèles :Projecteurs - SP-M220S (1.19 mb)
Projecteurs - SP-M250S (1.19 mb)