Log:
Évaluations - 4, GPA: 4.3 ( )

Instructions Casio, Modèle A146

Fabricant : Casio
Taille : 5.15 mb
Nom Fichier :
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


2. Use the [..] key to move the highlighting to “Wireless” and then press the [ENTER] key. 3. Use the [..] key to move the highlighting to “Change wireless connection” and then press the [ENTER] key. • This displays a dialog box like the one shown below for changing the wireless connection. • Each of the connection names that appear on the dialog box corresponds to an SSID as shown below. Connection Name SSID Wireless Connection 1 casiolpj_default1 Wireless Connection 2 casiolpj_default2 Wireless Connection 3 casiolpj_default3 MobiShow Connection 1 casiolpj_mobishow1 MobiShow Connection 2 casiolpj_mobishow2 MobiShow Connection 3 casiolpj_mobishow3 • For details about MobiShow connection, see “Projecting from a Terminal with MobiShow Installed” (page 39). 30 4. Use the [..] and [..] keys to move the highlighting to the connection name you want to select and then press the [ENTER] key. • This will cause a “Do you want to change the wireless connection?” confirmation dialog box to appear. 5. Press the [..] key to move the highlighting to “Yes” and then press the [ENTER] key. • The wireless connection needs to be restarted in order to reflect the change, which will cause the projected image to go blank. It may take a little time before the wireless screen is projected again. To initialize the Wireless setup 1. While the Wireless screen is being projected, press the [MENU] key. 2. Use the [..] key to move the highlighting to “Wireless” and then press the [ENTER] key. 3. Use the [..] key to move the highlighting to “Initialize Wireless Setup” and then press the [ENTER] key. • This will cause a “Initialize the Wireless setup?” confirmation dialog box to appear. 4. Press the [..] key to move the highlighting to “Yes” and then press the [ENTER] key. • This returns all projector network settings (all settings on the System Admin page) to their initial defaults. For details, see “System Admin Page Settings” (page 36). 31 System Admin Page Operations and Settings System Admin Page Operations and Settings While the projector is connected to a computer via wireless LAN, you can use the computer’s web browser to access the projector’s System Admin page. The System Admin page can be used to configure the projector’s wireless LAN connection settings from your computer. System Admin Page Operations Important! To perform the operations presented here, you must be logged in to the projector’s System Admin page from your computer. For information about logging in, see the procedure starting from step 2 under “To log in to the projector’s System Admin page” (page 19). Configuring Settings You can configure the following settings from the System Admin page. • Login password • Network settings (IP setting, DHCP setting) • Wireless LAN connection settings (mainly security) To change the System Admin login password 1. Establish a wireless LAN connection between the projector and computer, and log in to the projector’s System Admin screen from the projector. 2. Click “Change Password”. • This displays a screen for changing the password. 32 3. Enter the new password twice into the “New Password” and the “Reinput Password” input boxes. • You can enter up to eight characters as the password. • Note that you will need the password you enter here the next time you log in to the System Admin page. Make sure you do not forget the password string you enter. If you keep a written record of the password, take care to ensure that it does not become lost or fall into the wrong hands. • If the characters you input into the two text boxes are not identical, a dialog box like the one shown below will appear when you click [Apply] in the next step of this procedure. If this happens, click [OK] and re-input the password correctly into both text boxes. 4. When everything is the way you want, click [OK]. • This registers the new password. You will need to enter the new password the next time you log in to the System Admin page. 5. To log out of the System Admin page, click “Logout”. 33 To configure projector network settings and wireless LAN connection settings 1. Establish a wireless LAN connection between the projector and computer, and log in to the projector’s System Admin screen from the projector. 2. Click “Setup” to display the System Admin page Setup screen. 3. Change a setting by entering a value or selecting an option. • For information about configuring wireless LAN security settings (SSID, security, passphrase/ WEP key), see “To configure security settings” (page 21). • For details about the meaning, settings range, and other information about the settings on the “Setup” screen, see “System Admin Page Settings” (page 36). 4. After everything is the way you want, click the [Apply] button. • This will apply the new settings. • The connection between the projector and computer will be terminated. If necessary, reconnect to the projector from the computer. 34 Initializing All System Admin Page Settings This operation returns all of the settings...

Ce manuel est également adapté pour les modèles :
Projecteurs - XJ-A141 (5.15 mb)
Projecteurs - A241 (5.15 mb)
Projecteurs - A246 (5.15 mb)
Projecteurs - A251 (5.15 mb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories