Évaluations - 3, GPA: 4.7 ( )

Fabricant : Acer Taille : 4.92 mb Nom Fichier : Langue d'enseignement:

Color (Computer / Video Mode) White Segment Use the white Segment control to set the white peaking level of DMD chip. 0 stands for minimal segment, and 10 stands for maximum segment. If you prefer a stronger image, adjust towards the maximum setting. For a smooth and more natural image, adjust towards the minimum setting. Degamma Effects the represent of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color. Saturation Adjusts a video image from black and white to fully saturated color. 4Press the to decrease the amount of color in the image. 4Press the to increase the amount of color in the image. Tint Adjusts the color balance of red and green. .Press the to increase the amount of green in the image. .Press the to increase the amount of red in the image. .“Saturation” and “Tint” functions are not supported under computer mode or DVI mode. Image (Computer / Video Mode) Keystone Adjust image distortion caused by tilting projection. (±16 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. .Auto : Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. .4:3 : The input source will be scaled to fit the projection screen and becomes 4:3 ratio. .16:9 : The input source will be scaled to fit the width of the screen and narrowed the height to make the displayed image becomes 16:9 ratio. Projection 4 Front-Desktop The factory default setting. 4 Front-Ceiling When you select this function, the projector turns the image upside down for ceiling-mounted projection. 4 Rear-Desktop When you select this function, the projector reverses the image so you can project behind a translucent screen. 4 Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from behind a translucent screen with ceiling mounted projection. H. Position (Horizontal Position) .Press the to move the image left. .Press the to move the image right. V. Position (Vertical Position) .Press the to move the image down. .Press the to move the image up. Frequency “Frequency”changes the display data frequency to match the frequency of your computer’s graphic card. If you experience a vertical flickering bar, use this function to make an adjustment. Tracking “Tracking” synchronizes the signal timing of the display with the graphic card. If you experience an unstable or flickering image, use this function to correct it. Image (Computer / Video Mode) .“H. Position”, “V. Position”, “Frequency” and “ Tracking” functions are not supported under DVI and Video mode. Management (Computer / Video Mode) ECO Mode Choose “On” to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose ”Off” to return normal mode. Auto Sh...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :