Évaluations - 5, GPA: 4.2 ( )

Fabricant : Toshiba Taille : 7.64 mb Nom Fichier : Langue d'enseignement:

Move down Move up Yes No No No Clamp 1 Adjusts the clamp pulse position. Lower Higher Yes No No No Clamp 2 Adjusts the clamp pulse width. Narrower Wider Yes No No No Operations 27 Using ¦ Cutting off When you want to project the images overhead Remote Controlprojector, etc. temporarily, this projector’s images and sound can turned off. Press the remote control’s MUTE button. The picture and sound are cut off. (The Mute function is released when pressing the MUTE button again.) Notes • The icon will appear while mute is in effect. • Operating any other functions will also cancel ¦ Freezing the image (Freeze) Remote The image being projected can be made to be frozen. This function is to Control be used to pause a video during a presentation, etc. Press the remote control’s FREEZE button. The picture pauses. (The Freeze function is released when pressing the FREEZE button again.) Notes • The icon will appear while freeze is in effect. • Other operation will also release the freeze. •Even if an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on video software sold on the market, broadcast or broadcast on cable except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. Using You can call up and conduct a of adjustments the operation buttons p.16 on the control panel ¦ How to use the menus The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button Display the Setting display menu 2. Select a Category Note The menu disappears. 3. Adjustments & Settings 5. End Press the MENU button Select a category by using . There are following four categories: Displays the current adjustments and settings of selected category. Item shown with gray cannot be adjusted with the current input source. p.30Image adjustment menu p.31Display setting menu Default setting menu p.32 Status display menu p.33 The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference. Item Adjustment/Setting Value These marks signify the items can be adjusted/set by using . These marks signify the items can be selected from the list by using . After an item is selected, apply it by pressing . Press to open the menu. This mark signfy that there are options. Press to display a list of options. 4. Back Return button • Menu adjustments and settings are saved when the power is turned off via the ON/ STANDBY button. If the power cable is disconnected before this, or the power goes out, then the data will not be saved. 29 Operations 28 Using Using The image Use this menu to adjust Items that can be adjusted with “Yes”, and those that cannot with “No” . Item Description Computer Y/PB/PR Video S-video Camera Contrast Adjust the image contrast. Lower Higher Yes Yes Yes Yes Brightness Adjust the brightness of the image. Darker Brighter Yes Yes Yes Yes Color Adjust the color of the image. Lighter Deeper No Yes Yes No Tint *1 Adjust the tint of the image color. Reddish Greenish No No Yes No Sharpness Adjust the sharpness of the image. Softer Sharper No Yes Yes Yes Noise reduction Set the function to reduce screen noise. On (Enable) Off (Disable) No Yes Yes No Picture modePress . Toggle the picture mode with / . Bright/Standard/True color Yes Yes Yes No R-level Adjust red of the image color. Less red More red Yes Yes Yes Yes G-level Adjust green of the image color. Less green More green Yes Yes Yes Yes B-level Adjust blue of the image color. Less blue More blue Yes Yes Yes Yes NTSC mode*1 Set the black level with / button. US: NTSC (US) mode Japan: NTSC (JAPAN) mode No No Yes No Shutter (TDP-S81) Set the shutter speed of the camera to the local power frequency. 50 Hz 60 Hz No No No Yes White balance*2 (TDP-S81) Set the white balance of the document camera. Auto Lock No No No Yes * 1: [ Tint] and [ NTSC mode] can be displayed and adjusted only when the video signal is set to [ NTSC] and [ NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other languages.) *2: Even if the white balance is set to [ Lock], turning the projector off disables this function and turning it on again the next time resets the menu to [ Auto]. (TDP-S81) 30 ¦ The display Use this menu to set screen display-related items. Item Description Screen size (Full): Display with 800 . 600 dot resolution (Thru): Display with sampling resolution (for computer input) (Wide): Wide-screen display (for Video, S-video, and Y/PB/PR) Language Select one of the languages below to use for displaying the menu and messages [ : Enter setting mode] [ :Selection] [Apply: ] English/Francais/Deutsch/Italiano/Espanol/Portugues/ / Svenska/Turkce/ / / / Background Screen to display when there is no input signal (Logo) (Blue) (Black) Icon Display icons as function guides On Off Start-up sc...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :