Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
(The remote control operations are still available.) Control panel operations are locked after the setting is done, and operations using the control panel buttons are disabled. • To release the key lock, set the [Key lock] to [Off] using the remote control. You can also set the [Key lock] to [Off] by pressing the [RETURN] button on the projector for 10 seconds. (When operating the main unit, the LAMP and TEMP indicators will glow orange for 3 seconds, and the projector will beep.) Note that when Network or USB memory input is selected, the [Key lock] cannot be set to [Off] with the [RETURN] button on the projector. [Closed Caption] • Off : Closed Caption is not displayed. • CC1-CC4 : Displays the dialogue and narration of TV programs and videos that are (Caption) closed captioned. • T1-T4 : Displays information not related to the current program, such as weather, (Text) stock data or the like, when it is provided by individual station. Note • This projector supports a special feature called closed captioning which allows subtitles to be displayed at the bottom of the picture. This is pursuant to the Regulations set forth by the US Federal Communications Commission (FCC). Due to the different broadcasting or signaling system, it may not operate correctly in other regions or countries where TV programs do not support closed captioning. • Closed Caption may not appear correctly depending on the signal conditions or the recording conditions of videotapes. • If the Text is not available, only a black rectangle background may appear on screen. To prevent this from appearing, set the Closed Caption to [Off]. • When you switch channels of broadcasting programs or play a videotape using “trick play” functions such as rewind or fast-forward, the operations in the connected device may cause the Caption or Text to remain on the screen for a while. • Closed Caption is available for Video and S-Video input images. 44 ¦ Displaying Information (Status display) This displays information about the input signal, lamp use time, etc. “Yes”: displayed, “No”: not displayed Item Input Mode name Resolution Frequency Sync Signal format Video mode Lamp time Lamp reset count Total time Version Description Input source name RGB or HDMI input mode [Note 1] Resolution (in dots) Sync frequency Sync signal polarity [Note 2] Y/PB/PR signal format Color method of video signal Time of lamp use [Note 3] The count for lamp replacement The total time that this projector is used. Firmware version [Note 4] Computer Yes Y/PB/PR Yes HDMI Video Yes S-video Yes Network Yes USB memory Yes Yes Yes No Yes No No No No Yes No Yes No No No No Yes No Yes No No No No Yes No No No No No No No Yes No No No No No No No No Yes Yes No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Notes 1: The mode of supported RGB signals p.100 and HDMI signals p.101 are shown. 2: Sync signal polarity shown as P (positive) or N (negative) for [H/V]. 3: Displays [Lamp time] as an estimated measure of when the lamp should be replaced. (Cannot be used as a counter of guaranteed lamp time.) When the displayed time approaches 2,000 hours, consult with a dealer about getting a replacement lamp TLPLW21 (sold separately). 4: [Version] shows the version of the projector’s internal control program. This version will be requested for customer service purposes. Note The displayed information will not be refreshed if the status changes. To refresh the • information, dismiss the display, then display it again. Operations 45 46 47 Network/ USB memory Before connecting via a network Check your computer’s Operating System before you connect a projector with your computer via a network. This projector supports the Network Projector function of Windows Vista® features. • If your computer’s Operating System is Windows Vista® and you intend to use the Network Projector function for network connection, see “Connection using the Network Projector (Windows Vista®)” p.46 , “Setting up the Network Projector/ Network Utility” p.51 and “Using the Network Projector” p.61 . • If your computer’s Operating System is Windows® 2000 or Windows® XP, see “Connection using the Network Utility (Toshiba original tool)” p.46 , “Setting up the Network Projector/Network Utility” p.51 and “Using the Network Utility” p.64 . Connection using the Network Projector (Windows Vista®)* * Now referred to as “Network Projector.” Functions By using the Connect to a Network Projector wizard, you can connect to any projectors which support the Network Projector function over a wireless or a wired network. You can make a presentation without any connection setting issues. Notes This function’s operation has been verified on the Ultimate and Business editions of Windows Vista®. To communicate in Ad hoc mode with a computer over wireless LAN also requires IP address settings. In case the resolution of your computer is higher than that of the projector, your computer must...
Ce manuel est également adapté pour les modèles :Projecteurs - TLP-X200U (7.66 mb)