Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
2) VGA, SVGA, XGA and SXGA are registered trademarks of the International Business Machines Corporation, U.S.A. 3) NTSC4.43 is the color system used when playing back a video recorded on NTSC on an NTSC4.43 system VCR. 4) DDCTM is a registered trademark of the Video Electronics Standard Association. 8 (GB) Location and Function of Controls 1 Zoom ring Location and Function of Adjusts the size of the picture. Controls 2 Focus ring Front/Left Side 2 3 6 45 7 1 qa qs 0 8 9 Rear/Right Side/Bottom w; qg qjqh qk qd qf ql Adjusts the picture focus. 3 Lens Open the lens cap before projection. 4 Ventilation holes (exhaust) 5 Front remote control detector (SIRCS receiver) 6 Adjuster When a picture is projected on the out of the screen, adjust the picture using this adjuster. For details on how to use the adjusters, see “How to use the adjuster” on page 10 (GB). 7 Security lock Connects to an optional security cable (Kensington’s). The security lock corresponds to Kensington’s MicroSaver Security System. If you have any comment, contact Kensington 2853 Campus Drive, San Mates, CA 94403 U.S.A. Tel: 800-535-4242: extension 3348 Home page address: 8 Carrying handle Pull up the handle from the projector for carrying. 9 Left speaker 0 Control panel For details, see “Control panel” on page 11 (GB). qa Right speaker qs Lens hood qd Rear remote control detector (SIRCS receiver) qf AC IN socket Connects the supplied AC power cord. 9 (GB) Location and Function of Controls qg Rear speaker qh Lamp cover qj Ventilation holes (intake)/air filter cover Notes • Do not place anything near the ventilation holes as it may cause internal heat build-up. • Do not place your hand or objects near the ventilation holes — the air coming out is hot. qk Air filter cover button Used to remove the air filter cover. For details, see “Cleaning the Air Filter” on page 33 (GB). Note Clean the air filter every 300 hours to ensure optimal performance. ql Adjuster buttons w; Connector panel For details, see page 12 (GB). How to use the adjuster To adjust the height Adjust the height of the projector as follows: 1 Lift the projector and press the adjuster buttons. The adjusters will extend from the projector. Adjuster buttons 2 While pressing the buttons, lower the projector. Then, release the buttons. For fine adjustment, turn the adjusters to the right and the left. Notes • Be careful not to let the projector down on your fingers. • Do not push hard on the top of the projector with the adjusters out. 10 (GB) Control panel INPUT HELPMENU ENTER RESET APA LIGHT VOL + VOL - LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY 56789 1234 qa 0 1 VOL +/– keys Adjust the volume of the built-in speakers and output level of the AUDIO jack. + : Increases the volume. – : Decreases the volume. 2 Arrow keys (M/m/ Ce manuel est également adapté pour les modèles :
Projecteurs - VPL-PX30 (2.37 mb)