Évaluations - 0, GPA: 0
(
)
)
|
Par ce dispositif a également d'autres instructions :
Facilité d'utilisation
Document Outline
- SAN Virtualization Services Platform 3.0.1 Release Notes
- Description
- Versions
- Product models
- Fixes
- Prerequisites
- Enhancements
- Installation instructions
- Host operating systems and multipath drivers
- Devices supported
- Capabilities and limitations
- Configuration best practices
- Operational best practices
- Issues and workarounds
- Upgrade issues
- Operating system issues
- VSM issues
- Threshold limit message only sent once
- Restoring a VSM setup from a backup cannot have PiTs
- Error 1618 during VSM installation
- Limit of 63 PiTs on thin virtual disk
- Front-end hosts not able to work with objects
- Export/import query does not work
- Cannot have same first 29 characters in sync mirror task names
- Cannot expand VDG without same DPM as the members
- VSM does not enforce 512 data movers
- Issue when exceeding 180 async mirror tasks
- MSA capacity can be reported in base 2 or base 10
- Error with Continuous Access license capacity when replicated differently
- HP XP array volumes show as failed after creation of storage pool
- Long boot time with large configurations
- Open port 5988 for SMI-S in Windows Firewall
- Cannot write to file error when using an MSA22xx array
- ForceActive with VSM server in unknown state
- Deletion of last DPM in a DPM group
- Changing virtual disk or group DPM selection from two to one DPM is not allowed
- Windows fault when array unresponsive
- VSM must be enabled for "Reboot on fatal error"
- VSM server connection to the SAN
- New front-end LUNs require rescan
- New back-end LUNs require rescan
- LUNs must have a preferred path/controller
- Import some HP and IBM back-end LUs only to designated pools
- Asynchronous mirrors and jobs do not fail when the source site is unavailable
- Accessing VSM may require Java Web Services cleanup
- IPv6 support limitations
- PiT deletions after reaching threshold Guard level
- Read-only permissions are not supported in the VSM GUI
- Potential for I/O loss with synchronous mirrors due to active DPM failure
- DPM issues
- Changing the LUN number of back-end virtual disks is not supported
- Changing back-end virtual disks to be write protected is not supported
- Replacing a DPM in a DPM group when upgrading from SVSP 2.x to SVSP 3.0.x
- Enabling Ethernet port without a cable results in diagnostic message on console
- A DPM upgrade reverts to SNMP host name setup
- DPM fails with No Bootable Device error
- Change active switch command does not work with Sun Solaris hosts
- Rescan is required after deleting or unpresenting virtual disks
- Period of high back-end load after a DPM reboot when synchronous mirror virtual disks are used
- I/O errors/timeouts when performing failover on large numbers of synchronous mirror virtual disks
- DPM reboots when a host has two different host types or personalities on two different SVSP domains
- DPM ports connected to a 4 Gb Fibre Channel switch may sometimes auto-negotiate to 2 Gb speed
- DPM NTP configuration does not work with Windows domain controllers
- DPM reboot when unpresenting/re-presenting back-end virtual disks
- Initial GUI port statistics values are zero for an extended time
- Running show debug dump command does not work as expected
- Order of magnitude of Tx/Rx Kbytes not correct with show ports stats command
- The ... Ce manuel est également adapté pour les modèles :
Logiciel - HP SAN Virtualization Services Platform Business Copy SW 1TB 101-250TB E-LTU (252.4 kb)
Logiciel - HP SAN Virtualization Services Platform Continuous Access SW 1TB 0-15TB E-LTU (252.4 kb)
Logiciel - HP SAN Virtualization Services Platform Extension Pair Data Path Module (252.4 kb)
Logiciel - HP SAN Virtualization Services Platform Hardware Bundle (252.4 kb)