Évaluations - 1, GPA: 3
(
)
)
|
Facilité d'utilisation
Thank you for purchasing a RadioShack Adjustable View Caller ID Box. Your Caller ID Box stores and displays up to 64 multiple (name and number) or 99 single (number-only) Caller ID records. It displays the caller’s telephone number (and name, if available in your area) and the current date and time, as provided by your local phone company to Caller ID service subscribers. Where Caller ID is offered, one or more of the following options are generally available: ! • caller’s number only • caller’s name only • caller’s name and number The actual number of Caller ID records your Caller ID box stores depends on the Caller ID information sent by the phone company. If your phone company sends name-and-number records, your Caller ID box stores up to 64 records. If your phone company sends number-only records, your Caller ID boxstores up to99records. NEW Call Light Press to scroll through Caller ID records and program the Caller ID box. Press to delete Caller ID records, or confirm programmed information. ! IMPORTANT ! To use this Caller ID box, you must be in an area where Caller ID service is available, and you must subscribe to the service. O BATTERY NOTES O • Dispose of dead batteries promptly and properly. • Do not burn or bury batteries. • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • When you replace the batteries, do not press any buttons on the Caller ID box after you remove the old batteries. Doing so could erase all stored information. CALLER ID BOX SETUP Caller ID is a service provided by your telephone company. When you subscribe to this service, between the first and second rings, the telephone company sends the caller’s telephone number (and name, if available) and the call’s date and time. The Caller ID box receives and displays this information for each call and updates the display with the current date and time. Your Caller ID box saves up to 99 call records, then replaces the oldest call record with each new one. INSTALLING BATTERIES You need three AAA batteries (not supplied) to power and protect the Caller ID box’s memory during a power failure. Batteries are available at your local RadioShack store or online at 1. Use a flat-blade screwdriver to lift the compartment door on the bottom of the Caller ID box. 2. Place three fresh AAA batteries (not supplied) into the compartment as indicated by the polarity symbols (+ and –) marked inside. 3. Replace the battery cover and snap it closed. When $appears or the display dims, replace the batteries. CALLER ID BOX CONNECTION Your Caller ID box is ETL listed to UL standards and meets all applicable FCC requirements. Your Caller ID box connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack,you canupdate thewiringyourself using jacks and adapters (available at your local RadioShack store), or have the telephone company update the wiring for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules and the requirements adopted by the ACTA. The telephone cord and modular plug provided is Part 68 compliant for connecting to the telephone company network. The USOC number for both the single-line and two-line jacks to be installed is RJ11C (or RJ11W for a wall plate jack). Connecting to a Single-Line Phone 1. Disconnect the telephone line cord from the modular phone jack on the wall and plug it into the PHONE JACK on the back of the Caller ID box. 2. Plug the Caller ID box’s pre-wired telephone line cord into the modular phone jack on the wall. ! IMPORTANT ! © 2002 RadioShack Corporation. All Rights Reserved. If an icon appears at the end of a paragraph, go to the box on that page with ! — Important RadioShack and RadioShack.com are trademarks used by the corresponding icon for pertinent information. O—Note RadioShack Corporation. Connecting to an Answering Machine Be sure to set your answering machine to answer after two or more rings, so the Caller ID box has time to record the call information. To Telephone 1. Plug the Caller ID box’s pre- 2. Plug one end of 3. Plug the line cord’s 4. Plug one end of a third wired telephone line cord another modular other end into the telephone line cord into the into the modular wall jack. cord (not supplied) answering machine’s answering machine’s phone into the Caller ID line jack. jack and the other end into the box’s PHONE JACK. phone’s modular jack. Connecting to a Two-Line Phone To record information about calls received on a two-line phone, you can connect two Caller ID boxes using a triplex adapter (not supplied, available at RadioShack). Each Caller ID box only records information about calls received on the line to which it is connected. Your modular phone jack must be an RJ14 jack wired for two phone lines. 1. Disconnect the telephone li...