Évaluations - 5, GPA: 4.8
(
)
)
|
Facilité d'utilisation
LINE 2 1-222-333-4444 SAVE IN AUTO 1 (Ex. (1) is pressed as a memory station number.) 10:50AM11/23 x4 .A beep sounds. LINE 2 1-222-333-4444 .The display will return to step 2. You can JOHN SMITH continue storing other items. To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds. .To cancel during programming, press (FUNCTION/EXIT). Start again from step 1. .You cannot store caller information in the Speed Dialer memory if a phone number is not displayed. Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. To erase a specific caller from the Caller List 1 1 Press (_) or (^) to enter the list. 2 2 Press (_) or (^) repeatedly to find the caller you want to erase from the Caller List. 3 3 Press (CLEAR). .A beep sounds and the information is erased. .After a few seconds, the display will show the previous caller information. .To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds. To erase all entries in the Caller List Make sure that the unit is in the standby mode. 1 1 Press (CLEAR). .To stop erasing procedures, press (FUNCTION/EXIT). 2 2 Press (.) OK/EDIT. .A beep sounds and all entries are erased. .“NO ITEMS STORED” is displayed, and the unit returns to the standby mode. 11:50AM11/24 LINE 1 1-111-444-7777 TINA ROBINSON 10:50AM11/23 x4 LINE 2 1-222-333-4444 JOHN SMITH 10:50AM11/23 CLEAR 10:00AM11/21 LINE 2 1-555-666-7777 JOHN WHITE 11:50AM11/24 ALL CLEAR ? 11:50AM11/24 ALL CLEAR 11:50AM11/24 NO ITEMS STORED Advanced Operation Speed Dialer Storing Phone Numbers in the Speed Dialer Memory You can store up to 10 phone numbers in the Speed Dialer memory. The dialing buttons ((0) to (9)) function as memory stations. Do not press any memory stations before storing to prevent misoperation. Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 1 Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? AM11/24 2 2 Press (.) OK/EDIT. 11:50 ENTER PHONE NO. 3 3 Enter a phone number, up to 22 digits. 11:50AM11/24 1234567890 .If you enter a wrong number, press AUTO=SAVE (CLEAR) and enter the correct number. 4 4 Press (AUTO). 11:50AM11/24 1234567890 PRESS 0-9 5 5 Press a memory station number ((0) to 11:50AM11/24 (9)). (Ex. (1) is pressed.) 1234567890 SAVE IN AUTO 1 .A beep sounds. .The display will return to step 1. You can 11:50AM11/24 continue storing other numbers after pressing (.) OK/EDIT. SAVE AUTO# ? .To return to the standby mode, press (FUNCTION/EXIT) or wait for 60 seconds. .You can exit the programming mode any time by pressing (FUNCTION/EXIT). .If a pause is required for dialing, press (REDIAL/PAUSE) where needed. Pressing (REDIAL/PAUSE) counts as one digit (p. 40). To erase a stored number Press (FUNCTION/EXIT). 2 2 Press (.) OK/EDIT. 3 3 Press (AUTO). 4 4 Press a memory station number ((0) to (9)) for the phone number to be erased. (Ex. (1) is pressed.) .A beep sounds. .The display will return to step 1. Dialing a Stored Number 11:50AM11/24 SAVE AUTO# ? 11:50AM11/24 ENTER PHONE NO. 11:50AM11/24 PRESS 0-9 11:50AM11/24 CLEAR AUTO 1 2 2 1 1 Lift the handset or press (SP-PHONE/HEADSET). Press (AUTO). Memory Station Numbers 3 Press the memory station number ((0) to (9)). .The stored number is dialed. (AUTO) Advanced Operation (SP-PHONE/HEADSET) Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company. After you subscribe, the voice mail system can answer calls automatically when the line is busy or if calls are not answered. Callers can leave messages by following the pre-recorded instructions. When voice mail messages are recorded, “ ” will flash. You can access the voice mail system quickly by using the (VOICE\MAIL) button. To use the (VOICE\MAIL) button, you must store your access phone number for the line first. (FUNCTION/EXIT) (_), (^), (.) OK/EDIT (VOICE\MAIL) (CLEAR) Line Buttons Display (SP-PHONE/HEADSET) “ Storing an Access Number in Your Voice Mail Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? 2 2 Press (_) or (^) repeatedly until “SAVE 11:50AM11/24 MAILBOX# ?” is displayed. SAVE MAILBOX# ? 3 3 Press (.) OK/EDIT. 11:50AM11/24 LINE1 1=NEXT 4 4 Press (_) or (^) to select the desired 11:50AM11/24 line, “LINE1” or “LINE2”. LINE2 1=NEXT 5 5 Press (.) OK/EDIT (NEXT key). 11:50AM11/24 .“ENTER MAILBOX#” is displayed. ENTER MAILBOX# .The current number will be displayed, if it was stored beforehand. 6 6 Enter your access phone number up to 11:50AM11/24 1234567PPP8901 32 digits. 1=SAVE .You may enter pauses*. .If you misdial, press (CLEAR). Digits are erased from the right. 7 7 Press (.) OK/EDIT (SAVE key). 11:50AM11/24 1234567PPP8901 .A beep sounds and the nu...