Évaluations - 3, GPA: 4.3
(
)
)
|
Facilité d'utilisation
If you intend to call from rotary or pulse telephones, order the Touchtone Dialer on the ACCESSORY page. LISTENING TO MESSAGES (OPTION 1) After the access code has been entered, messages will automatically be played. PAUSING MESSAGES During playback of the message you want paused, press 1on your keypad. Messages will be paused for up to one minute before disconnecting. To resume playback, press 1again. ERASE MESSAGES (OPTION 2) During playback of the message you want erased, press 2on your touchtone keypad. To confirm deletion of the message, you will hear a beep. 1 2 To erase all messages, press 2after hearing “ End of Messages. ” You will hear a beep and all messages will be erased. Press 3on your telephone keypad when finished speaking. Your new greeting will play automatically. CHANGE YOUR GREETING (OPTION 3) If your TI-310 is currently playing back messages, press 1on your keypad to pause playback. Press 3on your telephone keypad, a beep will be heard, begin recording your new greeting. 3 NOTE: n There is a one minute maximum for recording your greeting through remote operation. SKIP BACKWARD (OPTION 4) Press 4on your keypad to skip back to the previous message. 1 REPEAT MESSAGE (OPTION 5) Press 5on your keypad to repeat the current message. 1 SKIP FORWARD (OPTION 6) Press 6on you keypad to skip forward to the next message. 1Press 8on your keypad after hearing “ End of messages.” to turn the answering machine off. Upon exiting remote operation, the unit will be turned off and no further messages will be recorded. REMOTE ANSWER OFF/ON (OPTION 7 & 8) 2In the event you accidentally turned your answering machine off, press 7on your keypad to turn the unit back on. 1 EXITING REMOTE OPERATION (OPTION 9) Press 9on your keypad at any time during remote operation to exit. 1 MESSAGE RETRIEVAL WHEN MEMORY IS FULL If the TI-310’ s memory is full, you will hear three short beeps followed by, “ Memory full. ” To retrieve messages remotely when the TI-310’ s memory is full: Enter your 3-DIGIT ACCESS CODE as the greeting plays. 2After listening to messages, you may press 2on the keypad to erase all messages and allow callers to leave new messages. IMPORTANT SAFETY INSTALLATION INSTRUCTIONS 1. Never install telephone wiring during 2. Never install telephone jacks in wet locations 3. Never touch uninsulated telephone wires network interface. 4. Use caution when installing or modifying telephone SAFETY PRECAUTIONS When using your telephone equipment, basic safety precautions fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use damp cloth for cleaning. 4. Do not use this product near water; for example, near a bath tub, wash bowl, tub, in a wet basement, or near a swimming pool. 5. Do not place this product on an unstable cart, stand, or table. The product may to the product. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To protect it from overheating, these openings must not be blocked or covered. The openings should never placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in an enclosed environment unless proper ventilation is provided. 7. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused animals or persons walking on it. 8. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 9. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 10. To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified serviceperson when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is subsequently used. 11. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in per...