Évaluations - 0, GPA: 0 ( )

Fabricant : Philips Taille : 1.58 mb Nom Fichier : Langue d'enseignement:

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Inser ting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Automatically setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . 6 3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . 8 Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 9 5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . 82-90 1. Introduction Congratulations on your purchase of the Philips SBC RU545 universal remote control. After installing the remote control you can operate a maximum of 4 different appliances with it: TV, DVD, video recorder and satellite or cable decoders. You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’. 2. Installing the remote control Inserting the batteries 1 Press the cover inwards and slide it in the direction of the arrow. 2 Place two R03, UM4 or AAA type batteries into the battery compar tment, as shown. 3 Slide the cover back and click it firmly into place. Testing the remote control The remote control has been programmed to operate most Philips appliances. Because the RU545 may use different signals for each make and even for different models of the same make, it is advisable to test whether your appliance responds to the RU545. The example below (TV) instructs you how to do this. You can repeat the same steps for other appliances (DVD, video recorder, etc.) which you want to operate using the RU545. Example of TV: 1 Turn your TV on manually or use the original remote control. Tune to channel 1. 2 Use the RU545’s mode selector to select TV. Press the key until the green light under TV in the selector window lights up. If no green light appears, check whether the batteries are properly inserted (see ‘Inserting the batteries’). TV VCR SAT DVD 4 Instructions for use 3 Check whether all the keys are working. For an overview of the keys and their functions see ‘3. Keys and functions’. – If the TV responds as it should to all of the key commands the RU545 is ready for use. MENU OK PROG AV PROG VO L VOL • If the device does not respond at all or not to all of the key commands, follow the instructions under ‘Setting the remote control’. Setting the remote control This is only necessar y if your appliance does not respond to the RU545. If that is the case, the RU545 does not recognize the brand and/or model of your appliance and you need to program the remote control to do so. The example below (TV) instructs you how to do this. You can repeat the same steps for other appliances (DVD, video recorder, etc.) which you want to operate using the RU545. Example of TV: 1 Turn on the TV manually or use the original remote control. Tune in to channel 1. 2 Look up the brand of your TV in the code list at the back of this manual. One or more four-figure codes are shown for each brand. Note the first code. Be careful! There are separate tables for TV, video, DVD, etc. Make sure you use the codes from the correct table. 3 Select TV with the mode selector. (See ‘Testing the remote control’.) TV VCR SAT DVD Keep keys ‘1’ and ‘3’ pressed simultaneously for five seconds until the green light under TV in the selector window flashes twice and then remains lit. MENU OK SHIFT 1 2 3 4 5 6 7 8 0 9 5 Then enter the code noted in step 2 using the digital keys. – The green light in the selector window will now flash twice. If the light flashes once for an extended period, the code has not been entered properly or the wrong code has been entered. Star t again from step 2. 6 Point the RU545 at the TV and check that it responds as it should. – If the TV responds to all of the key commands, the RU545 is ready for use. Do not forget to note your code. • If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. English 5 Instructions for use English Automatically setting the remote control If you cannot find the right code for your brand device, the remot...

Téléchargez votre

Pour télécharger, entrez 2 chiffres :