Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Inser ting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Adjusting device selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . 9 Assign Volume control to another mode . . . . . . . . . . . . . . . . . . . . . . . . . 9 Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . 10 5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 68-83 1. Introduction Congratulations on your purchase of the Philips SRU560 universal remote control. After installing the remote control you can operate a maximum of 6 different devices with it: TV, DVD player/recorder, video recorder, amplifier/receiver, CD player and SAT (settop box, satellite or cable decoder). You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’. 2. Installing the remote control Inserting the batteries 1 Press the cover inwards and slide it in the direction of the arrow. 2 Place two AAA type batteries into the batter y compar tment, as shown. 3 Slide the cover back and click it firmly into place. Note: If the device indicators in the selector window (DVD, SAT, VCR, CD and AMP) and the Standby key blink four times after ever y key press, the remote control is indicating that its batteries are running low. Replace the old batteries with two new AAA batteries. Testing the remote control The remote control has been programmed to operate most Philips devices. Because the SRU560 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your device responds to the SRU560. The example below (TV) instructs you how to do this. You can repeat the same steps for other devices (DVD, video recorder, etc.) which you want to operate using the SRU560. Example of TV: 1 Turn your TV on manually or use the original remote control. Tune to channel 1. 2 Press the SELECT key to select TV. Press the key until the Standby key lights up. If the key does not light up, check whether the batteries are properly inserted (see ‘Inserting the batteries’). 4 Instructions for use 3 Check whether all the keys are working. For an overview of the keys and their functions see ‘3. Keys and functions’. – If the TV responds as it should to all of the key commands the SRU560 is ready for use. • If the device does not respond at all or not to all of the key commands, follow the instructions under ‘Setting the remote control’, or for online setup go to: Setting the remote control This is only necessar y if your device does not respond to the SRU560. If that is the case, the SRU560 does not recognize the brand and/or model of your device and you need to program the remote control to do so. The example below (TV) instructs you how to do this. You can repeat the same steps for other devices (DVD, video recorder, etc.) which you want to operate using the SRU560. Automatically setting the remote control The remote control will now automatically search for the right code for your device. Example of TV: 1 Make sure the TV is switched on and select a channel using the original remote control or the keys on the TV (for example channel 1). The SRU560 emits the ‘switch off TV’ signal for all models of TV that are stored in the memory. • If the device is a DVD-player/recorder or video recorder, inser t a disk or tape and star t playback. 2 Press the SELECT key to select TV. Press the key until the Standby key lights up. 3 Then keep keys 1 and 3 pressed simultaneously for three seconds until the Standby key flashes twice and then remains lit. Press and hold the Standby key of the SRU560. – The SRU560 now star ts emitting all known ‘TV off’ signals, one by one. Each time a code is sent, the Standby key lights up. When your TV switches off (stand-by), release the Standby key of the SRU560 immediately. English 5 – The SRU560 has now found a code that works on your TV. 6 Check if you can operate all functions on your TV with the SRU560. • If this is...