Log:
Évaluations - 1, GPA: 5 ( )

Instructions Philips, Modèle SRU740/10

Fabricant : Philips
Taille : 13.97 mb
Nom Fichier :
Langue d'enseignement: svitenesfrdenldafi
Aller à la télécharger



Facilité d'utilisation


Do not forget to note your code. • If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. 7 Instructions for use English SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 7 Instructions for use English 3. Keys and functions The illustration on page 3 gives an overview of all keys and their functions. 1 y Standby . . . . . . . . switches TV, SAT, DVD,VCR or AMP on or off. 2 Indicator LEDs 3 -teletext on/off (disc menu) -text off -index -play (VCR/DVD) -text hold -record (VCR/DVD) -wide screen TV -red teletext key -rewind (VCR/DVD) -green teletext key -stop (VCR/DVD) -yellow teletext key -pause (VCR/DVD) -blue teletext key -wind (VCR/DVD) 4 MENU . . . . . . . . . . . turns the menu on and off. 5 Cursor keys . . . . . . cursor up, down, left, right in a menu. 6 AV . . . . . . . . . . . . . . . switches between external inputs of your equipment. 7 INFO . . . . . . . . . . . . turns menu info on and off. 8 - VOL +. . . . . . . . . . . adjusts the TV or AMP volume. 9 Digit keys . . . . . . . . - direct choice of channels and other functions. -source selection keys in amplifier mode (together with SHIFT). Try out other combinations with the Shift-key on your device in order to find out which functions are available. Only functions featured on the original remote control are available. 0 SHIFT . . . . . . . . . . . for extra functions.When pressed at the same time as a second key, the second key will get another function. For example: SHIFT + . . . . . . installs your TV. SHIFT + . . . . . . stores TV settings. ! / . . . . . . . . . . . . . . . selects between one- and two-figure channel numbers. @ 2 22/ SURROUND . selects previous programme/channel. selects surround modes. # - PROG + . . . . . . . . selects a previous or following channel. $ s . . . . . . . . . . . . . . . . mutes the sound of the TV or DVD. % OK. . . . . . . . . . . . . . . confirms your selection. ^ BACK . . . . . . . . . . . . jumps back one level in the menu or turns off the menu. & SELECT. . . . . . . . . . selects TV,VCR/DVD, SAT or AMP mode. If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’. If the device does not respond at all, or not to all of the key commands, follow the instructions under ‘Setting the remote control’. It is possible that you must enter another code for the device. 8 Instructions for use 4. Extra possibilities Adjusting device selection (Mode selector) The SRU740 is default set for operating TV, SAT (settop box, satellite or cable decoder), DVD (or VCR) and AMP (amplifier). You can select the device you wish to operate with the SELECT key (mode selector). Each option allows operation of one device only. If desired, you can program the SELECT key (mode selector) to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the SAT mode for a second TV. 1 Switch on the second TV. 2 Press the SELECT key to select SAT. Press the key until the SAT LED lights up. Then keep keys 1 and 6 on the SRU740 pressed simultaneously for three seconds, until the SAT LED lights up. Press keys 9, 9 and 2 in that order. Press the SELECT key to select TV. Press the key until the TV LED lights up. 6 Press the 1 key. – The SAT LED flashes twice. SAT will now allow you to operate your second TV. Program the SRU740 to operate the second TV. See ‘Setting the remote control’. Adding a function to the remote control If you want to add a function to the SRU740, you can contact the Philips service line for Universal Remote Control to ask for the 5-figure code for the extra function. English 9 Instructions for use English Assigning the volume control to another mode The volume controls (Vol +,Vol - and s) on the SRU740 are assigned to either your TV or your amplifier/receiver, depending on the device you have selected: MODE VOLUME CONTROLS TV mode selected ............................Volume controls work with TV DVD (VCR) mode selected........Volume controls work with TV SAT mode selected ..........................Volume controls work with TV AMP mode selected ........................Volume controls work with amplifier/ receiver If you want a different setup, the volume control assignment can be changed. Example: In SAT mode you want to operate the amplifier/receiver volume control 1 Press the SELECT key to select SAT. Press the key until the SAT LED lights up. 2 Then keep keys 1 and 6 on the SRU740 pressed simultaneously for three seconds, until the SAT LED flashes twice and then remains lit. 3 Press keys 9, 9 and 3 in that order. 4 Press the SELECT key to select SAT. Press the key until the SAT LED lights up in the selector window. Restoring the original functions of your remote control 1 Keep keys 1 and 6 on the SRU740 pressed simultaneously for three seconds, until one of the LEDs (TV, SAT, DV...


Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories