Évaluations - 0, GPA: 0
(
)
)
|
Facilité d'utilisation
VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+. 8. ENTER Used after direct channel number entry to immediately change to the selected channel. 9. INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.). 10. NUMBERS Enter numbers for direct channel selection. Some products require Enter to be pressed after channel selection. 11. LAST Returns to the previously selected channel, or DVD repeat toggle. EXIT Used to exit menu functions. 12. MUTE Turns off the TV sound while the picture remains. OK Selects menu items for the device you are controlling. 13. CHANNEL UP/DOWN Changes the channels. 14. CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle. The Satellite GUIDE is accessed under the CC button when in SHIFT mode. 15. SETUP Used for setup. 16. SHIFT Press to access “shifted” functions (labeled in Green). See page 7. 4 5 SRU4050A-OM(4D)_H14042A.pmd 4-5 10/9/2006, 2:49 PM Button Functions, cont. Button Functions, cont. Button Functions, cont. Button Functions, cont. SAT Functions CHANNEL+ and CHANNEL-buttons perform the “Page+” and “Page-” function for on-screen Guide Menus used by some Satellite systems. INFO button brings up Satellite Display screen for current Channel and system information. The Satellite GUIDE is accessed under the CC button when in SHIFT mode. DVD Functions FORWARD and REVERSE buttons control the speed of Fast Forward and Reverse Playback respectively. CHANNEL+ and CHANNEL-buttons respectively locate the succeeding or preceding Chapters or Tracks on a disc. SUBTITLE (CC) button turns the subtitles on or off. REPEAT (LAST) button performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track. INFO button brings up DVD Display or Control Menu for Chapter/Track/Title number, Time remaining/elapsed indication, system information, etc. PLAY button is used to start Disc playback and for Menu selection on some DVD players. STOP button stops Disc playback. PAUSE button pauses Disc playback - press PLAY to resume. INPUT button activates the DVD Player’s SETUP Menu. INPUT When in TV mode the INPUT button performs the INPUT source switch function. When in a mode that has been programmed for VCR the INPUT button performs the TV/VCR antenna switch function. When in a mode that has been programmed for Cable the INPUT button performs the A.B switch function. When in a mode that has been programmed for SAT the INPUT button performs the TV/SAT switch function. When in a mode that has been programmed for DVD the INPUT button performs the DVD Setup function. OK means same as SELECT - some manufacturers use OK label and others use SELECT label on their remotes. CC will activate the Closed Caption feature if your device has that feature. 6 SHIFT Button The SHIFT button is a “toggle” button. I.E. press and release it to get into shifted operation, press and release again to get back out. The Red Indicator is on when you are in “shifted” mode. The shifted functions are those labeled in Green i.e. MENU, EXIT, OK, GUIDE, and the navigation keys. When not in Shift these buttons operate respectively as INFO, LAST, MUTE (M), CC, CHAPTER/CHAN UP/ DOWN and VOLUME UP/DOWN. The non-shifted functions are those labeled in Black or Blue. To access the shifted “green” functions, press and release SHIFT. The Red Indicator will stay on while in Shift mode and blinks off briefly for any subsequent button press. Press and release desired button labeled in green for that function. To exit Shifted operation, press and release the SHIFT button. Note the remote will automatically time-out from Shifted mode if no button is pressed for approximately 15 seconds. To access the following functions in SAT or DVD Modes, press SHIFT first. MENU button brings up the Menu screen - use with the UP, DOWN, LEFT and RIGHT navigation buttons. OK button is used for on-screen Menu selection. EXIT button is used to Exit or Clear on-screen Menu displays. Example: To access Menu and use the navigation functions. 1. Press and release SHIFT (red indicator turns on). 2. Press and release the MENU (INFO) button. 3. Press and release the UP, DOWN, LEFT and RIGHT buttons as desired. 4. Press and release the EXIT (LAST) button to clear the on-screen Menu display. 5. Press and release SHIFT for normal remote operation (red indicator turns off). 7 SRU4050A-OM(4D)_H14042A.pmd 6-7 10/9/2006, 2:49 PM Direct Code EntrySetup Direct Code EntrySetup Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Insert 2 CR2032 lithium batteries (+ facing up). 3. Press the battery cover back into place. Note: you will lose any programmed codes after changing the batteries. The remote defaults to the factory setting and you will need to reprogram the remote. Battery Saver Your remote automatically turns off if the buttons are depressed more than 30 ...
Ce manuel est également adapté pour les modèles :Télécommande - SRU4050/17 (402.9 kb)