Log:
Évaluations - 3, GPA: 4 ( )

Instructions LG, Modèle 202B

Fabricant : LG
Taille : 426.85 kb
Nom Fichier : d8402202-e7cc-4250-af47-26632af3a961.pdf
Langue d'enseignement: en
Aller à la télécharger



Facilité d'utilisation


Cable Tie Mesh Sleeving with right angle connectors is for connecting to RJP. Output Cable Assembly Parts List Cable Item Description Assembly Cable Assembly No. Approx. approx. 1. Left/Right Audio Cable. 3.0 12.0 2. Composite Video Cable. Feet Feet 3. RJ-45 Control Cable in in w/Yellow Protective Sleeves Length Length 4. RGB Cable. 5. Digital Video Cable. 6. Cable Ties. 1. 2. 3. 4. 5. AUDIO VIDEO CONTROL RGB DIGITAL L-R w/Yellow VIDEO Sleeve 206-4094 13 Accessory Cable: DVI to HDMI Adapter Cable Strain Relief Male Connector Female Connector Special Connections Note: DVI to HDMI Adapter Cable For TVs equipped with HDMI, this adapter cable will be required to connect the RJP for digital video/audio. ............... ..... ....DVI/PC AUDIO IN HDMI/DVIIN RS-232C PC IN UPDATE DIGTAL AUDIO OUT (OPTICAL) RS-232C NORMAL (DTV) CONTROL AUDIO IN VIDEO 1 IN VIDEO 2 IN AUDIO IN M.P.I. ANTENNACABLE RJP INTERFACE FUTURE USE AC IN Strain Relief for Accessory HDMI Cable The weight of the DVI adapter connection / cable bundle may put a strain on the HDMI con- nection, causing it to become disconnected from the TV. Relieve the weight by attaching a cable tie in the position shown. Note: The actual appear- ance of the TV etc., may be different than shown in the drawing. 14 206-4094 Specifications Application Makes available to the hotel’s guests, a multi-media interface to the in-room TV display panel. Audio/Video input jacks are provided for guest devices such as DVD/CD Players, Laptop Computers, Camcorders, etc. Installer Connections Digital Video Out Digital Video Connector RGB OUT 15-pin RGB PC Monitor Connector Control Out Control Jack (8-Pin RJ-45) Video Out 1 Vpp into 75 ohms, Composite or Y+C Combined Video Jack +/- 1 db @ 4.2 MHz Audio Out L-R Left - Right Audio Jacks Max: 1.6 V RMS (1 KHz) @ 600 ohms, Typ: 250mV RMS @ 600 ohms Supplied Accessories List (Cable Assembly) Note: RJP-201B cable bundle is approx. 12 feet in length and RJP-202B cable bundle is approx. 3 feet in length • Digital Video Cable • PC Video RGB Cable • Control Cable (8-Pin RJ-45) • 1-Set Left-Right Audio/Video Cables (Misc. Hardware) • 2-Security (pin-in) Torx (T-20) head Screws (2-Installed) • 2-Retainer Clips, L-Shaped (2-Installed) • 1 Black Cable Tie (DVI to HDMI Adapter Cable see page 14.) (Separate Cable) • DVI (F) to HDMI (M) Adapter Cable (Optional connection) Note: Design and specifications are subject to change without prior notice. 206-4094 15 Specifications Contd. Dimensions Height 2.125 Inches (53.975 mm) Width 9.0 Inches (228.6 mm) Depth 3.125 Inches (79.375 mm) Weight (Approx.) .7 Pounds (0.317514 kgs) End-User D evice Inputs Audio In 3.5mm Stereo Audio Jack Audio In L-R Left - Right Audio Jacks (Nom In: 250mV RMS @ 22K ohms) Overload In: 1.6V RMS Max Video In Composite Video Jack 1 Vpp, 75 ohms PC Video In 15-pin RGB PC Monitor Connector Digital Video In Digital Video Connector Regulatory FCC Class B, Digital Video Device Environmental Parameters Operating Temperature 0° to 40° Degrees Celsius (32° to 104° Degrees Fahrenheit) Storage Temperature -20° to 85° Degrees Celsius (-4° to 185° Degrees Fahrenheit) Cooling Free Air Convection Humidity 10% to 90% Non-condensing 16 206-4094 Troubleshooting Equipment Setup Analysis Notes • Make sure all connectors and connections are tight and secure on user device, RJP and TV. • Check to assure user device, RJP and TV are all powered up and working properly and that the TV Installer menu items are set correctly. • Audio and Video can be from different sources. Default is TV tuner Audio and Video, if no other audio/video source is connected. • Audio source must be viable. The audio output from the customer’s device must be present when connected to be heard at the TV. Test Procedures • Test and connect only one user device to determine if RJP is providing audio/video to TV. • Test user device on another RJP (perhaps located in a different room) to determine if user device is compatible with RJP. • On LCD or Plasma TV, Installer menu items: 040 Auto Camport needs to be disabled by setting it to 000. 093 RJP Available needs to be set to 001 to enable RJP mode. Following are some possible solutions to problems: Problem Possible Cause(s) Check RJP, User Device and In-Room TV No Power • Power not connected? No Audio • Have all audio connections been made? • Audio output available? • Volume level turned up? • Sound muted? • TV setup correct for RJP? (Installer menu item 040 is set to 000 and 093 set to 001.) • Try another RJP. • Priority level? (Disconnect other devices.) • Connections made after 040 and 093 menu items set. (Make connections before adjusting menu items 040 and 093.) No Video • Video output available? • All video cables connected? • TV setup correct for RJP? (Installer menu item 040 is set to 000 and 093 set to 001.) • Priority level? (Disconnect other devices.) Poor Video • Check connections. (Video pass-through no user action possible.) 206-4094 17 Troubleshooting Flow Charts No Pow...

Ce manuel est également adapté pour les modèles :
Télécommande - RJP-201B (426.85 kb)

Écrivez votre propre critique du dispositif



Texte du message
Votre nom :
Entrez les deux chiffres :
capcha





catégories