847 Holt Road Webster, NY 14580-9103 Phone: (585) 872-0010 Toll-Free: (800) 828-6308 Fax: (585) 872-0739 RD-8C, RW-8C Remote Control On Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Ch8 RW 8C Remote Level Contro Master On Ga n Ga n Remo e D sabled Eu ob ock Da a Connec or On Back V+Da a 0 1 2 3 4 5 6 7 8 9 10 0 1 2 3 4 5 6 7 8 9 10 On Ch1 Ch2 Ch3 Ch4 Ch5 Ch6 Ch7 Ch8 RD 8C Remote Leve Contro Master On Ga n Ga n Remo e Disab ed XLR Data Connec o On Top Or Back Do No Use Trans o mers 1 3 2 V+Da a 0 1 2 3 4 5 6 7 8 9

The software programming needs to be done before connecting the remote. After the 24.24M is programmed for the desired RD8C fader assignments, the computer must be disconnected from the Note: On newer 24.24M units which show an illustration of WR-5 wiring on the back panel, it is not necessary to wire pin 2 and pin 5 together at the 24.24M data connector. 24.24M before the remote can be connected. The 24.24M will remember the last level settings that were sent from the remote after it is disconn

The WR-4 will also allow control of the output channel volume using the two lower keys. To select an input audio source, simply press one of the six corresponding input select keys. Multiple input sources may be assigned to a single select key, and also multiple selected keys may be engaged at a given time. Select keys that are currently engaged will have their corresponding LED lit. To deselect an input source, simply press the corresponding key again. To change the output volume, simply scroll

Compatible products currently include Pema amplifiers, ne8800 and ne4800 system processors, the ne24.24M matrix processor, and all models of the NE multichannel (four or eight channel) power amplifiers. Additional products may become available in the future. Using Protea NE software, six function select buttons and two parameter adjust buttons are available to control a limited range of assigned functions within their host product. Up to four WR-5e units can be daisy-chained and phantom powered